TC 9.12 Win10 Save Position Issue
Moderators: white, Hacker, petermad, Stefan2
TC 9.12 Win10 Save Position Issue
Good day,
Win 10 Prof + 9.12 TC don't save position when exit.
Operation -> Save on exit (checked)
Conf -> Save position doesn't save the position.
Win 10 Prof + 9.12 TC don't save position when exit.
Operation -> Save on exit (checked)
Conf -> Save position doesn't save the position.
Re: TC 9.12 Win10 Save Position Issue
If you are using the default menu, go to Configuration> Save Position, or assign the internal command cm_ConfigSavePos to a buttonbar button.
Last edited by ts4242 on 2018-09-08, 22:15 UTC, edited 1 time in total.
Re: TC 9.12 Win10 Save Position Issue
peenjke,
How about 9.21a?
Roman
How about 9.21a?
Roman
Mal angenommen, du drückst Strg+F, wählst die FTP-Verbindung (mit gespeichertem Passwort), klickst aber nicht auf Verbinden, sondern fällst tot um.
Re: TC 9.12 Win10 Save Position Issue
Are other settings NOT saved or just the position? If TC.ini file has been set to be saved in TC's installation folder and TC is installed under "Program Files", is TC being run "As admin"?
- Wanderer -
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Normally using latest TC on:
x32: WinXPx32 SP3
x64: Clients/Servers from Win7 to Win11 and Win2K12Srv to Win2K22Srv, mainly Win10 though.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Normally using latest TC on:
x32: WinXPx32 SP3
x64: Clients/Servers from Win7 to Win11 and Win2K12Srv to Win2K22Srv, mainly Win10 though.
Re: TC 9.12 Win10 Save Position Issue
2Hacker, 2wanderer
Settings in Operation -> Save on exit aren't related to saving position
Settings in Operation -> Save on exit aren't related to saving position
Re: TC 9.12 Win10 Save Position Issue
ts4242,
Roman
?2Hacker
Roman
Mal angenommen, du drückst Strg+F, wählst die FTP-Verbindung (mit gespeichertem Passwort), klickst aber nicht auf Verbinden, sondern fällst tot um.
Re: TC 9.12 Win10 Save Position Issue
I'm aiming at "not having permission to write the ini file because it's located in TC's folder under program files"...
- Wanderer -
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Normally using latest TC on:
x32: WinXPx32 SP3
x64: Clients/Servers from Win7 to Win11 and Win2K12Srv to Win2K22Srv, mainly Win10 though.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Normally using latest TC on:
x32: WinXPx32 SP3
x64: Clients/Servers from Win7 to Win11 and Win2K12Srv to Win2K22Srv, mainly Win10 though.
Re: TC 9.12 Win10 Save Position Issue
2Hacker, 2wanderer
I noticed that you were answering the question without notice that the settings he mentioned had nothing to do with the problem.
Anyway, I made a mistake too as I suggested an answer he had already tested.
I noticed that you were answering the question without notice that the settings he mentioned had nothing to do with the problem.
Anyway, I made a mistake too as I suggested an answer he had already tested.
Re: TC 9.12 Win10 Save Position Issue
I had noticed it. Both settings are saved in the same INI file though (assuming no redirection is taking place), that's why i asked if other settings are saved normally, to make sure there is no chance of not having permissions to save to the INI file.
- Wanderer -
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Normally using latest TC on:
x32: WinXPx32 SP3
x64: Clients/Servers from Win7 to Win11 and Win2K12Srv to Win2K22Srv, mainly Win10 though.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Normally using latest TC on:
x32: WinXPx32 SP3
x64: Clients/Servers from Win7 to Win11 and Win2K12Srv to Win2K22Srv, mainly Win10 though.
Re: TC 9.12 Win10 Save Position Issue
I updated to 9.21a.
TC installed to C:\\Users\username\totalcmd
I want to correct myself:
TC position in display area save when TC in the middle of the screen
But i want to see TC on 3/4 of display (see attach) --> and when i place TC like this, push "Save position" + "Save Setting" --> Close.
Open TC 64bit.
Image: https://drive.google.com/open?id=1odmwtoiI07IABOkdYUNswnEWpX7fyqLF
Re: TC 9.12 Win10 Save Position Issue
Could it be that the window is docked (AeroSnap)?peenjke wrote: ↑2018-09-11, 13:00 UTC Image: https://drive.google.com/open?id=1odmwtoiI07IABOkdYUNswnEWpX7fyqLF
Regardsghisler(Author) wrote: ↑2018-06-01, 14:28 UTC Unfortunately I cannot fix it for docked windows, because there is no Windows command to set a window to a docked state.
Holger
Make our planet great again
- ghisler(Author)
- Site Admin
- Posts: 48083
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Re: TC 9.12 Win10 Save Position Issue
The best you can do is move the undocked window to the desired position WITHOUT causing the dock/snap mechanism! Then the coordinates can be saved. Otherwise TC will only see the coordinates BEFORE the dock/snap was activated.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com