RegEx content plug-in with Unicode support, 32+64 bit
- based on Perl Compatible Regular Expressions (PCRE) library 8.39
This plug-in may replace TC's RegEx engine for file content.
As of version 2.5 you can also use it for searching in filenames.
So what's special about it?
It can use the full PCRE features, primarily intended for using the singleline mode "(?s)",
which Total Commander can't provide (a possible use).
As of version 2.1 you can also use it to compare files in TC's Synchronize dirs function.
There is no need to provide Regular Expressions, just use a general search string for the file's content
and escape the necessary syntax characters or quote the whole term (\Q...\E),
and you can e.g. count the string occurrences and therefore filter and narrow your search with
a custom number of strings that your files must contain in order to match the search in Total Commander.
Additionally you can create Random Strings and return the detected file encoding (check for Unicode files).
It also features result caching in memory, to get previously searched files/fields in an instant, with a definable entry limit.
There is support for a text filter, which will filter certain file formats, e.g. for .PDF and .DOC files,
to expand the otherwise raw file search to most document/office files.
As of version 2.5 there is support for the Oracle Outside In Technology Content Access filters.
When installed and working, those filters will provide an additional powerful Unicode capable fulltext search for TC 9.0 and above
(on top of the text filter capability for the normal plug-in operation).
All configuration is done through an INI file "PCREsearch.ini", where you can create fields you may need for search repeatedly
or just for general search (un- and re-load the plug-in).
This file is located in the same directory as the plug-in file.
When loaded, the expressions are used as long as the plug-in remains in memory.
If you don't want to restart Total Commander every time to change the Expressions,
just make your changes, save the file and use the internal TC command cm_UnloadPlugins
to unload all plug-ins and start another search.
There is a configuration utility provided ("PCREsearchConfig"), which greatly helps you
configuring your fields, and additionally has the ability to test expressions by using a test string,
plus it provides instant feedback in case of erroneous expressions.
- Using the full feature set for Perl/PCRE expressions when searching file content in TC, e.g. the Dotall/Singleline mode, Look-around assertions, Character properties incl. complete Unicode scripts and properties
- Up to 99 fields configurable in the plug-in's INI file
- Custom field names and types (boolean (yes/no), counting, string return, random strings)
- Counting individual string occurrences
- Compare files in TC's Synchronize dirs function, also for files with different encoding
- Searching in most Unicode files, not just plain ANSI (automatic encoding detection)
- Unicode file names and Unicode Regular Expressions
- Result Caching in memory - for retrieving fields in an instant when they were already obtained in the past
- Configurable memory limits for avoiding slow file reads and non-responsive TC
- Custom replacement schemes when returning strings (referencing subgroups)
- Create random strings by providing a RegEx
- Text filter support (xdoc2txt and Oracle OiT), which enables search in the otherwise unreachable text parts in most most office/pdf/text documents
- Unicode capable fulltext search for TC 9.0 and above when using the OiT filters
- Output line numbers and file offsets for search results
- Count the average string/result length in a file
- sort fields alphabetically before reporting them to TC
- Ships with a config utility which features: a RegEx test by typing a test string, on-the-fly RegEx error check,
built-in RegEx and replace string syntax summary, font selection
- Count line numbers of any file
- Count the occurrence of any string, character or byte in a file
- Count individual Strings/Matches, e.g. for skipping identical lines or words
- display the line number or the file offset on which your search term is found
- display the average string/result length of your search term
- Return the 1st, 2nd or nth line of a file to TC for display or search
- Filter and display file Headers for Magic Numbers / Signature, to check for files with erroneous extensions or embedded files
- Comparing text files with different line endings and/or varying whitespace (including empty lines), or source files with different indent styles, etc.
- Check files for Unicode encoding
- Return random strings with a custom character range, for e.g. randomizing file names in MRT, or quick random filling fields from different plug-ins in TC
- Search in filenames only and return a custom built result string to quickly preview purified filenames in TC's custom columns
Check the included HTML files for PCRE Syntax.
Default is case-insensitive search, to match TC's behavior.
Prefix your Expression with (?-i) to search case-sensitive.
The text filter tool requires Visual C++ 2008 runtimes, but you can patch the file to be portable (instructions provided).
The optional OiT filter needs a separate download from
Note when using the uLister plug-in:
You will need to use the same directory for the filter DLLs, or one plug-in won't work after the other was loaded.
Current Version 2.5:
Old Version 2.1:
Old Version 2.0:
Old Version 1.6 beta:
Old Version 1.5:
Old Version 1.3:
PCREsearch_1_3.rar (on file-upload.net)
and on rghost.net
Now using PCREsearch.Sample.ini, copying it to PCREsearch.ini before using the plug-in is recommended
Old Version 1.2:
Old Version 1.1:
Old Version 1.0:
Old Version 0.8:
Please report bugs and give me some feedback.
Install the plug-in to your preferred directory. Edit the PCREsearch.cfg which is now in that directory with your fitting Regular Expression, e.g.:Italiano wrote:Please help me perform a search from this screen shot:
What are the steps?
Code: Select all
Code: Select all
Save the file. Restart Total Commander or use the internal command cm_UnloadPlugins.
Open TC's search dialog.
Set or check the "Search in:" to where your files are, just like you usual would.
(if you have some large files (> 50 MiB) you could optionally exclude them in the advanced options since they slow down the search)
Go to the plugins tab, activate PCREsearch plugin to "yes", start a search.
(make sure that "Search in plugins" is checked)
Note: There's still a chance that for some files the search won't match if the words
and and world are split among lines.
In that case you could make things even tighter:
Code: Select all
Yes, I know your QuickSearch eXtended but I had no use for it so far.Samuel wrote:You could create a tcmatch.dll instead of a wdx plugin.
Is the tcmatch.dll only used for quick search?
It can't find any documentation about that DLL, i.e. the interface specs for it.
For every other plugin (wdx, wlx, wcx, wfx) documentations are quite good.
- Power Member
- Posts: 1878
- Joined: 2003-08-29, 15:44 UTC
- Location: Brandenburg, Germany
Understanding the Regular Expressions or understanding "how" to search with the plug-in?
Or already how to install the plug-in?
Like I said, go to the file PCREsearch.cfg, open it with an editor (press F4 in Total Commander when the file is selected).
Delete everything in it (should contain only ".*" when you just installed it)
and now copy and paste this expression which should fit exactly your sentence like you said:
Code: Select all
Type nothing else in it, just save the file now and close it.
Restart Total Commander (close it, open it again).
Now open TC's search dialog (dialog box Find files, like in your picture).
Set Search in: to the directory/folder in where you want to search, just like you would do normally.
(not necessary if you already navigated to your directory and then opened Find files, the path should already be there)
Search for: should be empty. (you may optionally set a filter to look just for text files or similar)
Don't check Find text, like you did in your picture, we don't need it for the plugin.
Now, go to the tab Plugins, select pcresearch. (it should now read: PCREsearch = yes)
Make sure Search in plugins is checked. (should be automatically set when you selected the plug-in)
Start your search.
It should now match your files containing your sentence!
You wouldn't find "the only one of its kind" with that.
I think you need to read some regular expression tutorials, the Total Commander help file also has some examples.
Your problem was that you don't know where line breaks occur for your sentence.
So the solution is that you just use the smallest possible start and end of your string and make the "middle" of it a variable.
You don't need to know which words precede and follow the string, you just use a description for it so that you can find it no matter where the line breaks are.
For "the only one of its kind" you could use sth. like:
Code: Select all
I count 17 characters between the and kind, including spaces.
So I just add two for (one single) line break. You might add four when you expect two line breaks,
or some more or less when there are fewer or additional spaces and so on.
Not really, because TC doesn't allow me to read what has typed in the plugin field.Italiano wrote:Is it possible to make it more user-friendly?
But well, like already mentioned, you can use cm_UnloadPlugins to reload the expression,
just type or paste it in TC's command line or create a button in the Buttonbar with that command.
While you're in the Buttonbar you can also create a button with a shortcut to the PCREsearch.cfg
so that you don't have to open it manually every time.
Besides that there's not much I an do to make it more comfortable,
at least until TC implements multi-/singleline search on it's own, but I'm open to suggestions.
I could recommend other programs that search files with RegEx,
but the point is to keep the file list in Total Commander so that you can continue to work with these files (keep the list open).