slow usb copy operations
Moderators: Hacker, petermad, Stefan2, white
slow usb copy operations
Hello,
i encounter really slow copy operations using TC for android 2.72, as well as 2.80 beta 4
i use a OnePlus 3 with official OxygenOS (android 6.01) with a usb type c to usb type a cable
the usb key is a kingston hyperx fury 64 Gb
if i use the embedded android file manager, using copy / paste operations, copy speeds are normal, but file transfers are not as easy to accomplish this way...
i encounter really slow copy operations using TC for android 2.72, as well as 2.80 beta 4
i use a OnePlus 3 with official OxygenOS (android 6.01) with a usb type c to usb type a cable
the usb key is a kingston hyperx fury 64 Gb
if i use the embedded android file manager, using copy / paste operations, copy speeds are normal, but file transfers are not as easy to accomplish this way...
sorry, seems my problem seems the same that the one reported here : http://ghisler.ch/board/viewtopic.php?t=45165
but my problem is not when moving files, but copying (maybe the same problem after all ?)
but my problem is not when moving files, but copying (maybe the same problem after all ?)
- ghisler(Author)
- Site Admin
- Posts: 50475
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
No, copying should be fine. Where are you copying from/to the USB key? Internal memory? LAN? FTP?
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
i do a copy from the usb key to internal memory.
the key has a 64GB capacity.
the phone has the same capacity too, no SD Card support.
i used to have a Nexus 9 tablet, which had received Android 6, 6.01 and several security fixes, then 7, and such copies did not slow down as what i get here.
i will try a copy from a LAN share, i have not thought to test that...
i will try with another key too.
and if the key is writable due to Android, i will try to put files on it from internal memory.
it might be a phone / rom problem too, as OnePlus USB might not conform to USB standard
the key has a 64GB capacity.
the phone has the same capacity too, no SD Card support.
i used to have a Nexus 9 tablet, which had received Android 6, 6.01 and several security fixes, then 7, and such copies did not slow down as what i get here.
i will try a copy from a LAN share, i have not thought to test that...
i will try with another key too.
and if the key is writable due to Android, i will try to put files on it from internal memory.
it might be a phone / rom problem too, as OnePlus USB might not conform to USB standard
some feedback :
when copying from LAN, no problem at all.
using my old Flash Voyager GT (2GB, usb 3, fat 32) with a 600MB file, i have no problem either.
trying again with the 64 GB key (fat32), the problem does not occur all the time.
i do not encounter the problem immediatly.
after some copies go well at normal speeds, next copies are done really slowly, but not always.
files are in a directory structure which contains 343 folders, and a 21GB total size.
is there a way to investigate further ?
when copying from LAN, no problem at all.
using my old Flash Voyager GT (2GB, usb 3, fat 32) with a 600MB file, i have no problem either.
trying again with the 64 GB key (fat32), the problem does not occur all the time.
i do not encounter the problem immediatly.
after some copies go well at normal speeds, next copies are done really slowly, but not always.
files are in a directory structure which contains 343 folders, and a 21GB total size.
is there a way to investigate further ?
- ghisler(Author)
- Site Admin
- Posts: 50475
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
You could try the same on a PC/Mac - copy big files to the USB key and check whether it suddenly gets slower.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
Hello,
please close this thread, because the problem has been solved.
i am not able to tell what solved the problem, though :
- i installed 2.80 beta 5 but have not made tests immediatly
- a few days ago there was an OTA upgrade on my OnePlus 3 and got Android 7.0 (OxygenOS 4.0.1)
i tend to think that the OTG support on the OP3 was incorrect.
please close this thread, because the problem has been solved.
i am not able to tell what solved the problem, though :
- i installed 2.80 beta 5 but have not made tests immediatly
- a few days ago there was an OTA upgrade on my OnePlus 3 and got Android 7.0 (OxygenOS 4.0.1)
i tend to think that the OTG support on the OP3 was incorrect.