Fastcopy tools - 5.9.0

[Fla$her]

2nsp
It's better to give links to fastcopy.jp as before. github doesn't work properly on all browsers. Thanks.

[nsp]

It's better to give links to fastcopy.jp as before. github doesn't work properly on all browsers. Thanks.

I have edited previous message to give link on fastcopy.jp

[nsp]

fastcopy 5.7.10
v5.7.10

• Fixed an exception occur in rare cases due to nearly 100% read error environment (in the same HDD mode).

v5.7.9

• Fixed an exception occur in rare cases due to frequent I/O errors (in the same HDD mode) (v5.7.7 only).
• Files dated 1980-01-02 will be resumed from verification is enabled only with Perfect Verify.
• Fixed an issue that the src hash value would always be 0 when AltStream/ACL checked with Conventional Verify (v5.7.7~8 only).

v5.7.8

• Fixed an exception occur in rare cases due to frequent I/O errors (in the same HDD mode) (v5.7.7 only).
• Files dated 1980-01-02 will be resumed from verification is enabled only with Perfect Verify.
  (The src hash value of dest files dated 1980-01-02 became 0 with Conventional Verify)

[nsp]

fastcopy 5.8.1
5.8.1

• Updated xxHash to the latest version (v0.8.3).
• Misc refine.

5.8.0

• Added Verify every 30 secs option.
• Added "automatically delete File Logs" option to Log Settings.
• Fixed an exception that occurred when there were a large number of directories (over 7 million) directly under one directory.

5.7.15

• Fixed an issue where the timestamp was not reflected when copying a file containing FC VerifyInfo in the AltStream with the AltStream enabled and FC VerifyInfo added options selected.
  Misc refine.

5.7.14

• Add Shows current speed (Src/Dest/Total speed, every second) in TransRate option.
• Fixed an issue where source information was not reflected when the Ctrl key was held down (even if FastCopy was not in the foreground) when launching /job= option. (v5.4.0 to v5.7.12. Updating is strongly recommended)

v5.7.12 Various stability improvements.
v5.7.11

• Added "Close FastCopy" to the Post-Process.
• When "Set to 1980-01-02 until verification completes" is enabled, retry will be performed even if timestamp restoration fails (effective in some environments).

v5.7.10

• Fixed an exception occur in rare cases due to nearly 100% read error environment (in the same HDD mode).

v5.7.9

• Fixed an exception occur in rare cases due to frequent I/O errors (in the same HDD mode) (v5.7.7 only).
• Files dated 1980-01-02 will be resumed from verification is enabled only with Perfect Verify.
• Fixed an issue that the src hash value would always be 0 when AltStream/ACL checked with Conventional Verify (v5.7.7~8 only).

v5.7.8[list

• Fixed an exception occur in rare cases due to frequent I/O errors (in the same HDD mode) (v5.7.7 only).
• Files dated 1980-01-02 will be resumed from verification is enabled only with Perfect Verify.
  (The src hash value of dest files dated 1980-01-02 became 0 with Conventional Verify)

[Native2904]

2KozakMak
This is my FastCopy button bar, which is invoked as a Pull-down Menu in TC

Code: Select all

[Buttonbar]
Buttoncount=3
button1=C:\Tools\FastCopy\FastCopy.exe
cmd1=C:\Tools\FastCopy\FastCopy.exe
param1=/cmd=Update /balloon=FALSE /error_stop /log=FALSE /auto_close /srcfile_w="%WL" /to="%T"
iconic1=0
menu1=Copy (update Ctrl-F5)
button2=C:\Tools\FastCopy\FastCopy.exe
cmd2=C:\Tools\FastCopy\FastCopy.exe
param2=/cmd=Move /balloon=FALSE /error_stop /log=FALSE /auto_close /srcfile_w="%WL" /to="%T"
iconic2=0
menu2=Move (Override Ctrl F6)
button3=C:\Tools\FastCopy\FastCopy.exe
cmd3=C:\Tools\FastCopy\FastCopy.exe
iconic3=0
menu3=GUI

2Horst.Epp

Hallo Horst,

hast Du kurz Lust mir zu erklären, wie man den Button erstellt?
Ich habe den zu meinen Pfaden angepaßt, aber wenn ich das dann Einfügen will, bekomme ich im Kontextmenü keine Möglichkeit dazu; über den UltraEditor weiß ich auch nicht, wie man den auseinander dividieren soll

Vielen Dank im Voraus!

[Horst.Epp]

Kopiere den obigen Text in eine Datei namens FastCopy.bar in einem Verzeichnis deiner Wahl
z.B. im FastCopy Verzeichnis.

Passe die Pfade in der Datei an den Pfad deiner FastCopy.exe an.
Ziehe diese Datei auf eine leere Stelle deiner TC Button Bar.
Nun rechte Maustaste auf den Button und Ändern wählen.
Die Option "Als Menü" anzeigen anhaken und Ok.

Ab jetzt hast du ein Pull-Down Menü.

[Native2904]

Danke sehr!

[KozakMak]

2Horst.Epp
Play sound at finish. I tried: /postproc=sound
but it doesn't work (

[Horst.Epp]

2Horst.Epp
Play sound at finish. I tried: /postproc=sound
but it doesn't work (

This is set in the GUI under
Options / Post-Process / Normal / Add/modify/Del

Only available for a registerd version.

[nsp]

This is set in the GUI under
Options / Post-Process / Normal / Add/modify/Del

1. In this dialog, register an action like "alarm01" or "sound" pointing to a sound file.To test, use a file like C:\Windows\Media\Alarm01.wav. --edited-- default Action name is Normal, Change to the one you want to register.
2. From commmand line add /postproc=alarm01.Use the registered action name.
3. Once the operation is finished, the post process "action" should be executed. This works even if your copy is not registered.

The finish action is maintained inside FastCopy2.ini file in section finaction_i i is the number o the action from 0 to .... The name of the action is the title attribute,......

[Horst.Epp]

2nsp
Thanks,
I never use sounds, so my answer was a blind guess.

[Native2904]

Thx.

Code: Select all

[finaction_4]
title="alarm01"
sound="C:\tcmd\Tools\Fast Copy\Alarm01.wav"
cmd="nircmd mediaplay 100 "C:\tcmd\Tools\Fast Copy\Alarm01.wav""
shutdown_time="-1"
flags="0"

[Ambaquista]

Work with descriptions?
When copy (or move) to the target folder, copy the available comments to the descrip.ion file in the destination folder?
I don't think so.

[Horst.Epp]

2Ambaquista
FastCopy doesn't know anything about descript.ion.

[Ambaquista]

2Horst
how I thought...
it is a shame, I have lots of descriptions
Thanks