[face=courier]Finaly normal plugin for Siemens/BenQ-Siemens x55/r65/x75/x85 (EGold, SGold, NewSGold) mobile phones flexmemory access created by VNavigator.
Supported models list (not complete):
Siemens ME45, S45/S45i, SL42/SL45/SL45i, S46
Siemens C55, C56, CL55, CT56, M55, S55, SL55
Siemens C60, C62, CF62, MC60
Siemens C65, C70, C72, CF75, CFX65, CX65, CX70, M65, SL65, S65, SP 65, SK65, SK6R
Siemens C75, CX75, M75, ME75
Siemens S75, SL75
BenQ-Siemens CF110, AL21, AF51, A31, AL26, CC75
BenQ-Siemens C81, M81, E71, EL71, S68
Current version is 1.7.6.588.
Include your phone model, SW version and data cable type information into bug reports.
FAQ
Q - How can I get my phone model, SW version and data cable type information?
A - Plug data cable into your phone (data cable must be already connected to computer), dial "*#06#" and hit "Info" or "More" or got ot "About phone" tab. Find appropriate strings ("Product", "SW-Version", "plugged in").
Q - There can I get drivers for my USB data cable?
A - DCA 510/512 (PL-2303 based), DCA 540/140.
Q - OK, I've installed driver, where do we go from here?
A - Device Manager\Ports for DCA 510/512, \Modems for DCA 540/140. Look for your device, and use appropriate port number in SOFS setup
Q - Plugin doesn't work with my phone, help!
A - Check port number and baud rate configuration (it should not exceed 115200 for all Siemens phones). If nothing helps, use SiMoCo.
Q - Is it possible to connect x65 phone via old three-wired cables designed for C55 with SOFS?
A - Yes, select "AT Enabler..." and "DTR"/"RTS" checkboxes in "Options" dialog.[/face]
VSOFS - OBEX plugin for Siemens/BenQ-Siemens x55/r65/x75/x85
Moderators: white, Hacker, petermad, Stefan2
VSOFS - OBEX plugin for Siemens/BenQ-Siemens x55/r65/x75/x85
Last edited by Black Dog on 2010-02-02, 12:09 UTC, edited 25 times in total.
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
?!?!
[face=courier]On 17-07-2005 18:16:49 +0000 poiuytr wrote:
p> Only COM cable support
What cable do you use, actually (DCA 500/510/512/540)? Cause ALL Siemens data cables drivers emulate COM %).[/face]
p> Only COM cable support
What cable do you use, actually (DCA 500/510/512/540)? Cause ALL Siemens data cables drivers emulate COM %).[/face]
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
Re: ?!?!
I'm new in this stuff, just bought an USB data cable.Black Dog wrote:[face=courier]On 17-07-2005 18:16:49 +0000 poiuytr wrote:
p> Only COM cable support
What cable do you use, actually (DCA 500/510/512/540)? Cause ALL Siemens data cables drivers emulate COM %).[/face]
Re: ?!?!
[face=courier]On 17-07-2005 18:16:49 +0000 poiuytr wrote:
p> I'm new in this stuff, just bought an USB data cable.
Can you read it's name from the box? Or is it noname? %)[/face]
p> I'm new in this stuff, just bought an USB data cable.
Can you read it's name from the box? Or is it noname? %)[/face]
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
Re: ?!?!
[face=courier]On 17-07-2005 19:55:12 +0000 poiuytr wrote:
p> It is MA-8730P from mobilaction.com
That's a clone of DCA 510/512, both on PL-2303 (with a power switch %). So have you already installed drivers?[/face]
p> It is MA-8730P from mobilaction.com
That's a clone of DCA 510/512, both on PL-2303 (with a power switch %). So have you already installed drivers?[/face]
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
Re: ?!?!
Yes and this plugin works. NiceBlack Dog wrote:[face=courier]On 17-07-2005 19:55:12 +0000 poiuytr wrote:
p> It is MA-8730P from mobilaction.com
That's a clone of DCA 510/512, both on PL-2303 (with a power switch %). So have you already installed drivers?[/face]
Re: ?!?!
[face=courier]On 18-07-2005 07:36:07 +0000 poiuytr wrote:
p> Yes and this plugin works. Nice :)
Yep - happy patching/tuning to you (do not forget to copy your "telo's" fullflash first %). BTW, have you just bought your Siemens as well (as data cable)?[/face]
p> Yes and this plugin works. Nice :)
Yep - happy patching/tuning to you (do not forget to copy your "telo's" fullflash first %). BTW, have you just bought your Siemens as well (as data cable)?[/face]
Last edited by Black Dog on 2005-07-18, 14:32 UTC, edited 1 time in total.
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
Re: ?!?!
I will!Black Dog wrote:[face=courier]do not forget to copy your "telo's" fullflesh first [/face]
About a month ago I bought the phone. It is my second Siemens in a row.Black Dog wrote:[face=courier]BTW, have you just bought your Siemens as well (as data cable)?[/face]
Re: ?!?!
[face=courier]On 18-07-2005 16:30:55 +0000 poiuytr wrote:
p> I will!
Do you have all necessary software for that?
p> About a month ago I bought the phone.
What model?
p> It is my second Siemens in a row.
Well, I guess that would be the last one (I mean real Siemens %).[/face]
p> I will!
Do you have all necessary software for that?
p> About a month ago I bought the phone.
What model?
p> It is my second Siemens in a row.
Well, I guess that would be the last one (I mean real Siemens %).[/face]
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
[face=courier]On 18-07-2005 22:04:29 +0000 tosbsas wrote:
t> I only have the usb cable too - anyone does it get working anyway??
INSTALL THAT CABEL'S DAMN DRIVER!!![/face]
t> I only have the usb cable too - anyone does it get working anyway??
INSTALL THAT CABEL'S DAMN DRIVER!!![/face]
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]
Re: ?!?!
Can you recommend the best one?Black Dog wrote:[face=courier]On 18-07-2005 16:30:55 +0000 poiuytr wrote:
p> I will!
Do you have all necessary software for that?
cxv70What model?[/face]
As Black Dog said drivers for usb cables emulate com port, so you can use programs designed for com with usb cable freely.tosbsas wrote:I only have the usb cable too - anyone does it get working anyway??
Spooky? %)))
[face=courier]On 21-07-2005 07:28:32 +0000 poiuytr wrote:
p> cxv70
It looks like that model is quite popular in Riga (!for those who can't read Russian - this and most of other links leads to Russian documentation!) %). Actually CXV70 is regular CX70 in "Volcano Black" case (as for me, I prefer original CX65 design), just enter "*#06#" and hit left softkey to make sure %).
p> Can you recommend the best one?
Oh, that's endless story %). First of all do not use original Siemens software, specially for x65 series, it's a crap. Everything else depends on your purposes. There are a lot of things you should know before you became able to manipulate with this stuff, and after some of that manipulations you would definitely lost manufacturer's warranty, but anyway %).
From the beginning visit this page and download SW25 and downgrade your SW version to it (it would be necessary to make possible patching and other flash and EEPROM manipulations, though in your case I see some extra difficulties).
After changing SW version to 25th you need PapuaUtils to read your phone codes and open access to bootcore.
After that you need V_KLay flash utility to make your phone fullflash backup !sic! (and to load/remove patches later - most interesting part of story %).
And after that download last SW and update your phone with it. You can update your phone with FFSInit and MAP last version from the same page as well, but that's not so necessary in your case.
Now you can change menu styles, apply patches, edit fullflash etc., etc.
Spooky? %)))
And w/o all this manipulations you can use e.g. SiMoCo (Siemens Mobile Control) instead of MPM or DES to have access to your phone address book, send SMS, make file manipulations etc. - excellent tool.
I can also suggest you some Java midlets, first of all MicroReader, Jimm and CoolBrowser.
p> As Black Dog said drivers for usb cables emulate com port
Talking about cables, there are two types of USB cables for Siemens mobile phones - DCA 510/512 (with clones like yours) and DCA 540 (you can actually do it yourself, it's quite simple). The former is COM/USB, i.e. it connects to phone's COM interface - this one is versatile, you can use it for SW update, patches and file transfers. The latter one is USB/USB, i.e. it connects to phone's USB interface. You can use it only for files transfer.[/face]
p> cxv70
It looks like that model is quite popular in Riga (!for those who can't read Russian - this and most of other links leads to Russian documentation!) %). Actually CXV70 is regular CX70 in "Volcano Black" case (as for me, I prefer original CX65 design), just enter "*#06#" and hit left softkey to make sure %).
p> Can you recommend the best one?
Oh, that's endless story %). First of all do not use original Siemens software, specially for x65 series, it's a crap. Everything else depends on your purposes. There are a lot of things you should know before you became able to manipulate with this stuff, and after some of that manipulations you would definitely lost manufacturer's warranty, but anyway %).
From the beginning visit this page and download SW25 and downgrade your SW version to it (it would be necessary to make possible patching and other flash and EEPROM manipulations, though in your case I see some extra difficulties).
After changing SW version to 25th you need PapuaUtils to read your phone codes and open access to bootcore.
After that you need V_KLay flash utility to make your phone fullflash backup !sic! (and to load/remove patches later - most interesting part of story %).
And after that download last SW and update your phone with it. You can update your phone with FFSInit and MAP last version from the same page as well, but that's not so necessary in your case.
Now you can change menu styles, apply patches, edit fullflash etc., etc.
Spooky? %)))
And w/o all this manipulations you can use e.g. SiMoCo (Siemens Mobile Control) instead of MPM or DES to have access to your phone address book, send SMS, make file manipulations etc. - excellent tool.
I can also suggest you some Java midlets, first of all MicroReader, Jimm and CoolBrowser.
p> As Black Dog said drivers for usb cables emulate com port
Talking about cables, there are two types of USB cables for Siemens mobile phones - DCA 510/512 (with clones like yours) and DCA 540 (you can actually do it yourself, it's quite simple). The former is COM/USB, i.e. it connects to phone's COM interface - this one is versatile, you can use it for SW update, patches and file transfers. The latter one is USB/USB, i.e. it connects to phone's USB interface. You can use it only for files transfer.[/face]
Last edited by Black Dog on 2005-07-27, 01:14 UTC, edited 2 times in total.
[face=courier]The Protoss do NOT run from their enemies.
It is here, that we shall make our stand.[/face]
It is here, that we shall make our stand.[/face]