These are all the bugs I noticed so far...
Moderators: white, Hacker, petermad, Stefan2
- excogitation
- Junior Member
- Posts: 8
- Joined: 2007-04-04, 23:56 UTC
- Location: München
- Contact:
These are all the bugs I noticed so far...
This is my first post here - so just tell me if I should do sth different next time
So the lower right button shouldn't read "anwenden" but sth. like "Liste"
(englisch version says "feed to listbox")
So the lower right button shouldn't read "anwenden" but sth. like "Liste"
(englisch version says "feed to listbox")
- excogitation
- Junior Member
- Posts: 8
- Joined: 2007-04-04, 23:56 UTC
- Location: München
- Contact:
so... I guess now I can post links...
Search [IMG]
I guess that's just because of DPI 115% (15,4 @ 1680 x 1050) anyways:
Multirename [IMG]
same here:
FTP [IMG]
There should be a send to back button here:
(and "VON" and "NACH" would look nicer "von" and "nach:" - I mean just bold)
FTP transfer [IMG]
Same here:
FTP delete [IMG]
- Send to Tray doesn't work anymore after bringing up the window using Alt+Tab -> Enter
- while searching you have to press abort first so that the close button works
- "mobile device" doesn't show in the devices list (you know... when you have a PDA attached via ActiveSync) / I know... WinCE Plugin
- when renaming a file and clicking somewhere - the file doesn't get renamed
that's so annoying because standardwindowsbehaviour is different
Don't know if you agree (f2 instead of alt+f6 would be so nice)
- copying from trash to folder by drag'n drop results in wrong filename
There is a bug related to renaming... that says file not found after renaming and opening a file... and now that I'm writing this post I can't reproduce it ...
Same bug when deleting a file - I'll post again... as soon as I figure out what's causing this.
So that's all for now.
The version I'm talking about is RC1.
I'm now switching to RC3.
If any/all of these problems are already fixed/don't need to be fixed - accept my apologies for this post.
Regards.
Chris
Search [IMG]
I guess that's just because of DPI 115% (15,4 @ 1680 x 1050) anyways:
Multirename [IMG]
same here:
FTP [IMG]
There should be a send to back button here:
(and "VON" and "NACH" would look nicer "von" and "nach:" - I mean just bold)
FTP transfer [IMG]
Same here:
FTP delete [IMG]
- Send to Tray doesn't work anymore after bringing up the window using Alt+Tab -> Enter
- while searching you have to press abort first so that the close button works
- "mobile device" doesn't show in the devices list (you know... when you have a PDA attached via ActiveSync) / I know... WinCE Plugin
- when renaming a file and clicking somewhere - the file doesn't get renamed
that's so annoying because standardwindowsbehaviour is different
Don't know if you agree (f2 instead of alt+f6 would be so nice)
- copying from trash to folder by drag'n drop results in wrong filename
There is a bug related to renaming... that says file not found after renaming and opening a file... and now that I'm writing this post I can't reproduce it ...
Same bug when deleting a file - I'll post again... as soon as I figure out what's causing this.
So that's all for now.
The version I'm talking about is RC1.
I'm now switching to RC3.
If any/all of these problems are already fixed/don't need to be fixed - accept my apologies for this post.
Regards.
Chris
Welcome excogitation
I assume you have a Laptop with a 15.4" WSXGA display, resolution with 1680 x 1050 pixels.
What's your reason to set of DPI 115% ?
You can change the font settings in: Configuration - Options - Font - Dialog box Font.
What's wrong with the first picture (Find Files) ?
When you have 1680 x 1050 pixel, why is the window of the "Multi Rename Tool" minimized to 646 x 460 Pixel ?
Please do one new topic per bug, collections like this will become almost unreadable. Do a query in the search first, for example "clicking somewhere when renaming a file" is indeed a windows bug.
I assume you have a Laptop with a 15.4" WSXGA display, resolution with 1680 x 1050 pixels.
What's your reason to set of DPI 115% ?
You can change the font settings in: Configuration - Options - Font - Dialog box Font.
What's wrong with the first picture (Find Files) ?
When you have 1680 x 1050 pixel, why is the window of the "Multi Rename Tool" minimized to 646 x 460 Pixel ?
Please do one new topic per bug, collections like this will become almost unreadable. Do a query in the search first, for example "clicking somewhere when renaming a file" is indeed a windows bug.
Rules and language
2excogitation
[mod]Good evening,
• Like “Stance” points out above (thanks), please respect the forum rules, then post one message per topic, preferably in already existing threads, if possible…
• The … [/I M G] marker is disabled here, so please use the U R L one,
or set it complete with the end-marker.
- Anyway, the images are not displayed within the messages
• Also, please show screen shots in English, this is an English forum thus the readers are not supposed able to read in German (I don't really…)
Clo (Moderator)[/mod]
[mod]Good evening,
• Like “Stance” points out above (thanks), please respect the forum rules, then post one message per topic, preferably in already existing threads, if possible…
• The … [/I M G] marker is disabled here, so please use the U R L one,
or set it complete with the end-marker.
- Anyway, the images are not displayed within the messages
• Also, please show screen shots in English, this is an English forum thus the readers are not supposed able to read in German (I don't really…)
Clo (Moderator)[/mod]
#31505 Traducteur Français de T•C French translator Aide en Français Tutoriels Français English Tutorials
Term "Anwenden" in Search (Alt+F7)
Good evening, Chris.
The button has been labelled "Anwenden" in the German version ever since the "Search (Alt+F7)" dialogue has existed.
It may not be the best term, but it definitely does not constitute a bug.
In analogy to "feed to listbox", the term "Zeige als Liste" might be appropriate.
Karl
Well, this applies to the German version only.excogitation wrote:So the lower right button shouldn't read "anwenden" but sth. like "Liste"
(englisch version says "feed to listbox")
Search [IMG]
The button has been labelled "Anwenden" in the German version ever since the "Search (Alt+F7)" dialogue has existed.
It may not be the best term, but it definitely does not constitute a bug.
In analogy to "feed to listbox", the term "Zeige als Liste" might be appropriate.
Karl
Dialogue box display problem using DPI 115%
You may simply resize the dialogue boxes.excogitation wrote:I guess that's just because of DPI 115% (15,4 @ 1680 x 1050) anyways:
Multirename [IMG]
same here:
FTP [IMG]
So where is the bug? In front of the keyboard?
Again, this is not TC7 specific.
Karl
Connect to FTP server: string formatting
No matter whether I agree or whether I don't, it is simply a matter of taste.excogitation wrote:There should be a send to back button here:
(and "VON" and "NACH" would look nicer "von" and "nach:" - I mean just bold)
FTP transfer [IMG]
Again no bug, and again in no way specific to TC7.
Karl
Aborting Search (Alt+F7)
Again, this no bug. It works as designed.excogitation wrote:- while searching you have to press abort first so that the close button works
You may interrupt the search process for various reasons, e.g. because the file you are looking for has been found. So there is no need to go on searching.
So you abort the search process, but of course, you wish to see the result.
Again this behaviour is not specific to TC7.
Karl
Mobile Devices not showing in device list.
Again, this is not new in TC7.excogitation wrote:- "mobile device" doesn't show in the devices list (you know... when you have a PDA attached via ActiveSync) / I know... WinCE Plugin
Complain to Microsoft for not sharing the required programming interface.
Moreover this has been discussed more than once in this forum.
Kindly use the search button, before reporting a well-known issue as a new bug.
Karl
Copying from Recycle Bin Results in Wrong Filename.
Again, this behaviour is not T.C. 7 specific, but as old as 32bit T.C. as such.excogitation wrote:- copying from trash to folder by drag'n drop results in wrong filename
Recycle bin is a special folder, the files stored there have been renamed to dcX.yyy.
If you simply restore them to the original location, they will get back their original filename.
TC does not support the internal Recycle Bin Info2 file format, therefore you will have to rename the files if you use TC to copy them from the recycle bin.
If so, this is a lacking feature, not a bug.
Karl
Last edited by karlchen on 2007-04-23, 21:59 UTC, edited 1 time in total.
Rename aborted if clicking outside the edit box.
Once again:excogitation wrote:- when renaming a file and clicking somewhere - the file doesn't get renamed
that's so annoying because standardwindowsbehaviour is different
this behaviour was not introduced in TC7, but has been this way since ages.
And the question if TC needs to imitate Explorer behaviour or not has been discussed in the forum as well.
Even if you do not like the current behaviour, it works as designed - ask C.G. - so once again, not a bug.
Karl
Bug Report Summary
You should have switched to RC3 before writing reports about alledged bugs, found in RC1.excogitation wrote:So that's all for now.
The version I'm talking about is RC1.
I'm now switching to RC3.
Most of the issues you reportedIf any/all of these problems are already fixed/don't need to be fixed - accept my apologies for this post.
+ are not TC 7 specific
+ do not constitute bugs at all, only TC does not behave as you expect it to
+ have been discussed before
If you wish to help find bugs in the current TC version, you are certainly welcome.
Yet, make sure the things you report are really bugs.
A bug means TC does not work as designed.
If TC does not always behave as you expect, this need not be a bug.
Almost none of the items in your "bug list" qualifies for the term "bug".
A few of the things which you labelled bugs actually might qualify as feature requests, e.g.
+ being able to copy items from the recycle bin and restoring the original names
+ better support for the "My Computer" namespace (access to devices like PDAs e.g.)
Kind regards,
Karl