Net - Port connection to other PC: connection failed

English support forum

Moderators: white, Hacker, petermad, Stefan2

mjhdavies
Junior Member
Junior Member
Posts: 8
Joined: 2016-08-29, 11:22 UTC

Post by *mjhdavies »

[quote="dadreamer

1. Download this one for vista to windows 7

https://www.microsoft.com/en-us/download/details.aspx?id=20483
"]

mjhdavies

Spasiva :) for your suggestion. I'll try it - and hope that it also works for Windows 10. I'll post the result here when I have done so.
dadreamer
Junior Member
Junior Member
Posts: 33
Joined: 2013-04-25, 04:28 UTC

Post by *dadreamer »

mjhdavies
Have you solved the problems with your USB cable and software? I've just found at Prolific website a simple tutorial for running WET utility on Windows 8.1 and 10. You may browse it here. Maybe it will be of any help for you.

Btw I ordered the same cable as yours by Goobay. So, when I get it I'll test it out and write the results here.
User avatar
ghisler(Author)
Site Admin
Site Admin
Posts: 48021
Joined: 2003-02-04, 09:46 UTC
Location: Switzerland
Contact:

Post by *ghisler(Author) »

Personally I own the "Belkin Easy Transfer Cable for Windows 8". Recently I have tried that cable with a freshly installed Windows 10: Although Windows 10 no longer supports the Microsoft Easy Transfer software, it recognized the cable immediately when I plugged it in. I was able to use it with Total Commander to connect to a Windows 7 system without installing any other software.
Author of Total Commander
https://www.ghisler.com
dadreamer
Junior Member
Junior Member
Posts: 33
Joined: 2013-04-25, 04:28 UTC

Post by *dadreamer »

Today I have received Active USB 3.0 Data Link Cable by Goobay and tested it immediately. It's perfectly working in both winusbtest.exe and TC. My tests was made on Windows 7 64-bit and Windows 8.1 64-bit. Currently I don't have Windows 10 but I'm going to check it out on that OS too.
Image: http://tinypic.com/view.php?pic=2d1rbbk&s=9
I just have one notice about USB 3.0 transfer speed. This list Supported cables for USB cable connection states that this cable should work at 80 megabytes per sec. But I couldn't reach such speed. It's working at approx. 55k - 60k kilobytes per sec., that corresponds to 53,71 MB - 58,59 MB per sec. It's less than the stated speed of that cable.
It's curiously enough that the cable's package contains a booklet w/ techical data, where I have read:
Data transfer rate: 5 Gbps
This value corresponds to 625 MB/s! :D Some kind of marketing move, I think.
User avatar
Hacker
Moderator
Moderator
Posts: 13052
Joined: 2003-02-06, 14:56 UTC
Location: Bratislava, Slovakia

Post by *Hacker »

dadreamer,
Well, your hard drive write speed is also relevant.

Roman
Mal angenommen, du drückst Strg+F, wählst die FTP-Verbindung (mit gespeichertem Passwort), klickst aber nicht auf Verbinden, sondern fällst tot um.
dadreamer
Junior Member
Junior Member
Posts: 33
Joined: 2013-04-25, 04:28 UTC

Post by *dadreamer »

Hacker

Now I run a built-in Windows tool winsat to check read/write speed of my HDD. Here are the results:
C:\Users\user>winsat disk -drive c
Windows System Assessment Tool
> Running: Feature Enumeration ”
> Run Time 00:00:00.00
> Running: Storage Assessment ‘-drive c -seq -read’
> Run Time 00:00:08.38
> Running: Storage Assessment ‘-drive c -ran -read’
> Run Time 00:00:10.52
> Running: Storage Assessment ‘-drive c -scen 2009′
> Run Time 00:01:06.35
> Running: Storage Assessment ‘-drive c -seq -write’
> Run Time 00:00:06.91
> Running: Storage Assessment ‘-drive c -flush -seq’
> Run Time 00:00:07.01
> Running: Storage Assessment ‘-drive c -flush -ran’
> Run Time 00:00:11.58
> Running: Storage Assessment ‘-drive c -hybrid -ran -read -ransize 4096′
NV Cache not present.
> Run Time 00:00:00.16
> Running: Storage Assessment ‘-drive c -hybrid -ran -read -ransize 16384′
NV Cache not present.
> Run Time 00:00:00.03
> Disk Sequential 64.0 Read 113.48 MB/s 6.8
> Disk Random 16.0 Read 1.56 MB/s 4.0
> Responsiveness: Average IO Rate 2.98 ms/IO 6.4
> Responsiveness: Grouped IOs 11.21 units 6.9
> Responsiveness: Long IOs 11.14 units 7.3
> Responsiveness: Overall 124.84 units 6.7
> Responsiveness: PenaltyFactor 0.0
> Disk Sequential 64.0 Write 124.40 MB/s 6.9
> Average Read Time with Sequential Writes 7.680 ms 5.1
> Latency: 95th Percentile 26.466 ms 4.0
> Latency: Maximum 58.339 ms 7.8
> Average Read Time with Random Writes 11.271 ms 4.2
> Total Run Time 00:01:54.22
I think it's more related to USB peripherals than to the disk drive. Well, I'll run the same test on new SSD when I install it on my system.
User avatar
Hacker
Moderator
Moderator
Posts: 13052
Joined: 2003-02-06, 14:56 UTC
Location: Bratislava, Slovakia

Post by *Hacker »

dadreamer,
Also both ports should be USB3.

Roman
Mal angenommen, du drückst Strg+F, wählst die FTP-Verbindung (mit gespeichertem Passwort), klickst aber nicht auf Verbinden, sondern fällst tot um.
dadreamer
Junior Member
Junior Member
Posts: 33
Joined: 2013-04-25, 04:28 UTC

Post by *dadreamer »

Hacker, they are :wink:
dadreamer
Junior Member
Junior Member
Posts: 33
Joined: 2013-04-25, 04:28 UTC

Post by *dadreamer »

dadreamer wrote:Well, I'll run the same test on new SSD when I install it on my system.
So today I did the test on W10 and my new SSD with the same cable. Sadly the transfer speed has not changed too much. It's still near 54k kilobytes/sec on SSD->HDD copying and 60k kilobytes/sec on HDD->SSD copying.
According to winsat the SSD is capable of these fantastic speeds:
> Disk Random 16.0 Read 287.63 MB/s 8.1
> Disk Sequential 64.0 Read 361.46 MB/s 7.9
> Disk Sequential 64.0 Write 242.97 MB/s 7.5
Currently I don't have another one SSD to do SSD->SSD test. But it seems to me that the drive read/write speed is not the reason here. USB 3.0 host controller might be responsible for these limits.
ghisler(Author) wrote:Recently I have tried that cable with a freshly installed Windows 10: Although Windows 10 no longer supports the Microsoft Easy Transfer software, it recognized the cable immediately when I plugged it in. I was able to use it with Total Commander to connect to a Windows 7 system without installing any other software.
I can confirm that both USB 2.0 and 3.0 Windows Easy Transfer cables work perfectly on Windows 10 without installing any additional drivers by Prolific. Although the user has a choice of installing additional Prolific software PCLinq5 which also installs Prolific drivers. These drivers change almost nothing in the system if standard winusb.sys has already been used.
Post Reply