[TC 11.02rc2 dark mode] drive info box too small in left drive button bar

[Brat2]

Dark Mode
Image: https://imageupload.io/AOJahcizQvsb72t
if enabled options "Show drive buttons" and "show two drive botton" and disable "flat icons".. then on the first panel of disks the stripes are superimposed on the vertical panel. This bug was noticed in dark mode. Normally mode everything is fine.
Image: https://imageupload.io/xfgoizSGzTyI0XU

Moderator message from: white » 2023-10-18, 11:26 UTC

Post split up into 3 separate reports.

The other 2 are here:

• viewtopic.php?t=80321
• viewtopic.php?t=80322

[white]

For your situation to show, you must disable the option menu Configurations/Options/Layout/Show drive combobox. In that case, a "button" with drive data is displayed on the drive button bar. For the left drive button bar, this button looks too narrow/doesn't fill all the available space. It isn't that the drive bar is superimposed on the vertical bar, the vertical bar is always below the drive bar(s).

[ghisler(Author)]

Confirmed, thanks. Postponed to RC4.

[white]

20.10.23 Fixed: Drive bar, flat icons disabled, dark mode, while drive dropdown list disabled: The panel border for the label, free and total space could overlap the position of the vertical bar (32/64)

Tested OK using TC 11.02rc4.
But may I suggest to change the description by replacing "overlap the position of the vertical bar" with "extend beyond the panel width":

20.10.23 Fixed: Drive bar, flat icons disabled, dark mode, while drive dropdown list disabled: The panel border for the label, free and total space could extend beyond the panel width (32/64)

[ghisler(Author)]

But may I suggest to change the description by replacing "overlap the position of the vertical bar" with "extend beyond the panel width":

Hmm, both are actually incorrect when you move the separator between the two panels away from the 50% value.
Any other suggestions?

[white]

But may I suggest to change the description by replacing "overlap the position of the vertical bar" with "extend beyond the panel width":

Hmm, both are actually incorrect when you move the separator between the two panels away from the 50% value.

You're right.

Any other suggestions?

How about:

20.10.23 Fixed: Drive bar, flat icons disabled, dark mode, while drive dropdown list disabled: The panel border for the label, free and total space could extend beyond the maximum width (32/64)

[ghisler(Author)]

OK, I will use that, see my fix in the online history.
https://www.ghisler.com/history1102.txt

[white]

OK, I will use that, see my fix in the online history.
https://www.ghisler.com/history1102.txt

Confirmed.

Moderator message from: white » 2023-10-26, 09:24 UTC

Moved to Fixed bugs.