Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Moderators: white, Hacker, petermad, Stefan2
Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Even with AutoComplete=0 set to the ini file, after accessing the commandline history once, it starts to offer to autocomplete the matching files from the current folder.
Image: https://i.postimg.cc/8cHsQN3V/Auto-Complete-0-Failing-since-tc1100x32.jpg
Bug was found on TC 11.00x32, TC 11.02x32, TC 11.03x32 RC2
This bug does not happens with TC 10.52x32 or older versions.
Steps to reproduce the bug:
---------------------------------------
1. Edit ini file and set AutoComplete=0 at [Configuration] section then start TC.
2. CTRL+DOWN to get the commandline focus.
3. CTRL+DOWN again to get the commandline history. (even if it is empty, does not matter)
4. ESCAPE to close the commandline history.
5. CTRL+DOWN to get again the commandline focus.
6. Press a single key, like the 'A' key, and the Autocomplete popup should show up like shown in the above picture.
Image: https://i.postimg.cc/8cHsQN3V/Auto-Complete-0-Failing-since-tc1100x32.jpg
Bug was found on TC 11.00x32, TC 11.02x32, TC 11.03x32 RC2
This bug does not happens with TC 10.52x32 or older versions.
Steps to reproduce the bug:
---------------------------------------
1. Edit ini file and set AutoComplete=0 at [Configuration] section then start TC.
2. CTRL+DOWN to get the commandline focus.
3. CTRL+DOWN again to get the commandline history. (even if it is empty, does not matter)
4. ESCAPE to close the commandline history.
5. CTRL+DOWN to get again the commandline focus.
6. Press a single key, like the 'A' key, and the Autocomplete popup should show up like shown in the above picture.
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Not confirmed (tested on Windows 7 and 10 with TC 11.03rc2 32bit and 64bit).
Are you sure you don't have another AutoComplete=0 in your wincmd.ini file
BTW instead of performing step 2-4 here above it is easier just to press Shift+RightArrow or Shift+LeftArrow (you dont even need to press shift if you are not using Brief View or SpecialCursorMovement in wincmd.ini) - or just click with the mouse on the command line.
Are you sure you don't have another AutoComplete=0 in your wincmd.ini file
BTW instead of performing step 2-4 here above it is easier just to press Shift+RightArrow or Shift+LeftArrow (you dont even need to press shift if you are not using Brief View or SpecialCursorMovement in wincmd.ini) - or just click with the mouse on the command line.
License #524 (1994)
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
To ensure the bug, I also did the test with fresh TC installs.
Anyway, it wont change the bug behavior.
With AutoComplete=0, the Command line's Autocomplete is supposed to never trigger.
Unlike TC 11.x, the older versions (TC 10.52 and olders) are working correctly with the same ini settings.
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Me too. And also I did use GUI options which were made exactly for such a quick turn on/off cases.To ensure the bug, I also did the test with fresh TC installs.
Not fully understand WHY you decided to use directly INI options...
https://ibb.co/Nyr9Sf9
So IF you will uncheck both checkmarks - you will get the desirable behavior. Tested on 11.03RC2
#146217 personal license
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Just to be sure, I just tested by unchecking the checkmarks, instead of editing the ini file directly, with the same result...AntonyD wrote: ↑2024-01-29, 09:20 UTCMe too. And also I did use GUI options which were made exactly for such a quick turn on/off cases.To ensure the bug, I also did the test with fresh TC installs.
Not fully understand WHY you decided to use directly INI options...
https://ibb.co/Nyr9Sf9
So IF you will uncheck both checkmarks - you will get the desirable behavior. Tested on 11.03RC2
Obviously the bug ALSO happens that way...
No offense, but do you guys even understand the bug i am reporting here ?
EDIT: Also, the steps I give on the first post is just a way to reproduce the bug, not a tutorial explaining how to use TC the best way.
No offense again, but this is a bug reporting forum, so please stop with your advices as they do not helps at all.
I am reporting a bug, not asking for help !
Thank you.
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Can confirm with a fresh ini, but only in TC 11.03RC2 32-bit, not 64-bit.
W10x64.
Roman
W10x64.
Roman
Mal angenommen, du drückst Strg+F, wählst die FTP-Verbindung (mit gespeichertem Passwort), klickst aber nicht auf Verbinden, sondern fällst tot um.
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
2byblo
But there is a bug - If I change AutoComplete=0 manually in wincm.ini (as described in the initial report) and restart TC, then autocomplete is correctly disabled
But if I use th GUI and disable "Auto-complete path"and "Auto-append suggested name" then autocomplete is NOT disabled - I have to restart TC for that to happen. And only in 32bit TC as Hacker also points out.
Also I have to have had the command line history dropdown activated for the bug to happen (that is why I mentioned the other ways of focusing the command line, to make sure that the described way is the only way of reproducing the bug).
I should think so. You are claming that the autocomplete function of path names is active also when AutoComplete=0 in wincmd.ini even though it shouldn't be. And here on my computers I can say that the autocomplete function indeed is disabled when AutoComplete=0 and is active when AutoComplete!=0.No offense, but do you guys even understand the bug i am reporting here ?
But there is a bug - If I change AutoComplete=0 manually in wincm.ini (as described in the initial report) and restart TC, then autocomplete is correctly disabled
But if I use th GUI and disable "Auto-complete path"and "Auto-append suggested name" then autocomplete is NOT disabled - I have to restart TC for that to happen. And only in 32bit TC as Hacker also points out.
Also I have to have had the command line history dropdown activated for the bug to happen (that is why I mentioned the other ways of focusing the command line, to make sure that the described way is the only way of reproducing the bug).
License #524 (1994)
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
- ghisler(Author)
- Site Admin
- Posts: 48088
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Confirmed. TC is turning off Auto-Complete when opening the history to prevent interference between history and auto-complete, and re-enables it when closing the history. It shouldn't try re-enable it with AutoComplete=0.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
2ghisler(Author)
can you also confirm that the bug does NOT occur if TC has been restarted after disabling "Auto-complete path"and "Auto-append suggested name" via the GUI?
can you also confirm that the bug does NOT occur if TC has been restarted after disabling "Auto-complete path"and "Auto-append suggested name" via the GUI?
License #524 (1994)
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
- ghisler(Author)
- Site Admin
- Posts: 48088
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Here it also occurs after restarting TC.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Hmm, Here under Windows 7 and 10 I can only reproduce it after disabling "Auto-complete path"and "Auto-append suggested name" via GUI UNTIL i have restarted TC - thereafter autocomplete=0 is respected.
License #524 (1994)
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
- ghisler(Author)
- Site Admin
- Posts: 48088
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
We will see whether my modification fixes your problem or not.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
- ghisler(Author)
- Site Admin
- Posts: 48088
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
This should be fixed in RC3, please test it![/mod]
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Confirmed fixed in TV 11.03rc3history.txt wrote:29.01.24 Fixed: Command line: Auto-complete would get enabled when opening command line history even with AutoComplete=0 (32)
![Smile :-)](./images/smilies/icon_smile.gif)
License #524 (1994)
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Danish Total Commander Translator
TC 11.03 32+64bit on Win XP 32bit & Win 7, 8.1 & 10 (22H2) 64bit, 'Everything' 1.5.0.1371a
TC 3.50 on Android 6 & 13
Try: TC Extended Menus | TC Languagebar | TC Dark Help | PHSM-Calendar
Re: Commandline's Autocomplete activating despite AutoComplete=0 in inifile
Bug as described by OP fixed.
Roman
Roman
Mal angenommen, du drückst Strg+F, wählst die FTP-Verbindung (mit gespeichertem Passwort), klickst aber nicht auf Verbinden, sondern fällst tot um.