List of changes (version 10.50 - 10.51): Difference between revisions

From TotalcmdWiki
Jump to navigation Jump to search
(First creation)
 
m (Fixed typo (32764) instead of (32/64))
 
Line 40: Line 40:
* (24.08.22) Fixed: Prevent the command LOADLIST from trying to read regular expressions, they are currently not supported (32/64)
* (24.08.22) Fixed: Prevent the command LOADLIST from trying to read regular expressions, they are currently not supported (32/64)
* (24.08.22) Fixed: When changing the directory of the inactive (target) panel via directory hotlist (Target dir field) or cm_SyncChangeDir, the last used directory of that drive wasn't remembered (only relevant when the two panels show different drives) (32/64)
* (24.08.22) Fixed: When changing the directory of the inactive (target) panel via directory hotlist (Target dir field) or cm_SyncChangeDir, the last used directory of that drive wasn't remembered (only relevant when the two panels show different drives) (32/64)
* (23.08.22) Fixed: When switching from to a view mode with a different window width set via auto-run commands, e.g. cm_100Percent 70|cm_50Percent, the file under the cursor could be moved out of the visible area (32764)
* (23.08.22) Fixed: When switching from to a view mode with a different window width set via auto-run commands, e.g. cm_100Percent 70|cm_50Percent, the file under the cursor could be moved out of the visible area (32/64)
* (23.08.22) Fixed: When switching from a view mode with thumbnail view to another one with thumbnail view, the cursor position was lost (32/64)
* (23.08.22) Fixed: When switching from a view mode with thumbnail view to another one with thumbnail view, the cursor position was lost (32/64)
* (23.08.22) Fixed: Installer: Running auto-install with parameter /A on a system with no previous installation didn't write the ini locations to the registry (32/64)
* (23.08.22) Fixed: Installer: Running auto-install with parameter /A on a system with no previous installation didn't write the ini locations to the registry (32/64)

Latest revision as of 21:07, 15 October 2022

List of changes (version 10.50 - 10.51) is a list of changes to Total Commander since version 10.50 until the release of version 10.51. The list starts at the latest change and goes back in time.

This page is transcluded into other pages. Editors must be aware of this and use "noinclude", "onlyinclude" and "includeonly" markup.


List of changes (version 10.50 - 10.51)

(01.09.22) Release Total Commander 10.51 final

  • (01.09.22) Fixed: Installer: Parameter /K made the installer look for the key in the current directory instead of the installer directory (32/64)
  • (01.09.22) Fixed: Tree panel wasn't updated when changing directories via Search - Go to file or via command line parameters with /O parameter (32/64)
  • (31.08.22) Fixed: LOADLIST didn't show error for non existing files with paths with prefix \\?\, e.g. \\?\c:\nofilehere.txt (32/64)

(31.08.22) Release Total Commander 10.51 release candidate 4b (RC4b), private release

  • (31.08.22) Fixed: LOADLIST didn't work when called again in a list previously loaded with LOADLIST when not using folder tabs (32/64)

(31.08.22) Release Total Commander 10.51 release candidate 4a (RC4a), private release

  • (31.08.22) Fixed: The backup name in compare by content was still wrong in 64-bit only when comparing file.ext with file.ext.bak (64)
  • (30.08.22) Fixed: Prevent DLL injection in installer (and TC) by preloading TextShaping.dll, loaded by Windows itself when using certain Windows functions (32/64)
  • (30.08.22) Fixed: OneDrive green circle overlay icons were not shown in the OneDrive for business folders. Experimental, add 4 to IconOverlaysOneDrive to enable (32/64)
  • (30.08.22) Fixed: LOADLIST didn't correctly handle paths with prefix \\?\, treated them as wildcards (32/64)

(29.08.22) Release Total Commander 10.51 release candidate 4 (RC4)

  • (29.08.22) Fixed: Treat missing WCMICON*.DLL the same as icons in main menu turned off, otherwise there were glitches in the displayed menus (32/64)
  • (28.08.22) Fixed: Button bar, show button as menu: Show entries with no icon but with command and a hint as text (32/64)
  • (28.08.22) Fixed: Button bar, show button as menu: Show entries with no command but with a hint text as text, ignore the icon field (32/64)
  • (28.08.22) Fixed: Separate tree: The path of the target panel could be shown as active in the tree when using a view mode with auto-run commands (32/64)
  • (28.08.22) Fixed: Compare by content: When started for the first time on 800x600 screen, moving the dialog also changed the separator position (64)
  • (28.08.22) Fixed: Compare by content, binary mode: Underlines for found text were shown in the wrong location when using a horizontal scrollbar (32/64)
  • (26.08.22) Fixed: Verify checksums: Only skip 2 spaces between checksum and file name (unless the name starts with *) and consider the rest as being part of the file name (32/64)
  • (25.08.22) Fixed: The backup name in compare by content was wrong when comparing file.ext with file.ext.bak (32/64)
  • (25.08.22) Fixed: Configuration - Options - Copy/Delete: Set width of "k" text field behind size dynamically to available width, some users had overlaps of the field with the line to the right (32/64)
  • (25.08.22) Fixed: When LOADLIST is called in a search results directory or a list previously loaded with LOADLIST, set the search base directory to the previous search/LOADLIST base directory (32/64)

(24.08.22) Release Total Commander 10.51 release candidate 3 (RC3)

  • (24.08.22) Fixed: Button bar, show button as menu: Always show buttons with empty command field as separators, even if they have an icon or hint text, hide when at the start of the bar (32/64)
  • (24.08.22) Fixed: The ZIPFROMLIST command could fail when called once with the zip name in the parameters field and once with the zip name in the command field (32/64)
  • (24.08.22) Fixed: With option QuickSearchExactMatch=1, quick search didn't always find the extension when starting the search with a dot only (using *. worked) (32/64)
  • (24.08.22) Fixed: Prevent the command LOADLIST from trying to read regular expressions, they are currently not supported (32/64)
  • (24.08.22) Fixed: When changing the directory of the inactive (target) panel via directory hotlist (Target dir field) or cm_SyncChangeDir, the last used directory of that drive wasn't remembered (only relevant when the two panels show different drives) (32/64)
  • (23.08.22) Fixed: When switching from to a view mode with a different window width set via auto-run commands, e.g. cm_100Percent 70|cm_50Percent, the file under the cursor could be moved out of the visible area (32/64)
  • (23.08.22) Fixed: When switching from a view mode with thumbnail view to another one with thumbnail view, the cursor position was lost (32/64)
  • (23.08.22) Fixed: Installer: Running auto-install with parameter /A on a system with no previous installation didn't write the ini locations to the registry (32/64)
  • (22.08.22) Fixed: Unpack from 7zip archive with ZoneId set, using Total7zip plugin, rename during unpacking -> the Zone ID was not set to the unpacked file with the changed name, but to the not overwritten file with the original name (32/64)
  • (22.08.22) Fixed: Compare by content, compare with file in encrypted 7z archive on one side: internal 7zip unpacker didn't ask again for the password if the user entered the wrong one (32/64)
  • (22.08.22) Fixed: Search, use list file in "Search in", e.g. @c:\totalcmd\list.txt: Ignore lines containing wildcards like *.dll when search depth is set to "current dir only" (32/64)
  • (21.08.22) Fixed: Installer: Copy the registry values IniFileName and FtpIniName from HKEY_LOCAL_MACHINE\Software\Ghisler\Total Commander to the same key under HKEY_CURRENT_USER if they don't exist there yet (32/64)
  • (19.08.22) Fixed: When clicking on "\" above the inactive (target) panel, activate the panel first before changing directories, otherwise the last used directory of that drive isn't remembered (32/64)
  • (19.08.22) Fixed: Do not show our own OneDrive green circle overlay icons when OneDrive isn't in On Demand mode (all files are always available offline) (32/64)
  • (19.08.22) Fixed: The OneDrive green circle overlay icons couldn't be turned on/off separately. IconOverlaysOneDrive now supports three values: 1=cloud icons, 2=checkmark icons, 3=both (32/64)
  • (19.08.22) Fixed: Only show the OneDrive green circle overlay icons below the OneDrive base directory, because copy&paste copies the attribute to other directories (32/64)
  • (18.08.22) Fixed: Improved look of OneDrive green circle overlay icons by using resampled icons (32/64)

(17.08.22) Release Total Commander 10.51 release candidate 2 (RC2)

  • (16.08.22) Fixed: Ignore commands CM_*BYNAME, CM*BYSIZE etc. when the parameter passed to it is negative (32/64)
  • (15.08.22) Fixed: Updated TCMDLZMA.DLL and TCLZMA64.DLL to LZMA SDK 22.01 (32/64)
  • (15.08.22) Fixed: Updated TC7Z.DLL and TC7Z64.DLL to LZMA SDK 22.01 (32/64)
  • (15.08.22) Fixed: Verify checksums: Blake3 library could cause an access violation (32/64)
  • (12.08.22) Fixed: The delete temporary file dialog, shown when editing multiple files from an archive in the same multiple document editor like PFE, could have dark background but light buttons when not focused (32/64)
  • (12.08.22) Fixed: When using a language file with a custom name like wcmd_test_deu.lng, also look for help file wcmd_test_deu.chm in the same directory before looking for wcmd_deu.chm and totalcmd.chm (32/64)
  • (12.08.22) Fixed: When clicking on ".." above the inactive (target) panel, activate the panel first before changing directories, otherwise the last used directory of that drive isn't remembered (32/64)
  • (12.08.22) Fixed: Lister: Drive letter in title bar was still shown in uppercase in some cases even with DrivesShowUpcase=0 set, e.g. when viewing files from archives (32/64)
  • (11.08.22) Fixed: Synchronize dirs: Cursor position was lost instead of staying on the file when clicking on one of the directional buttons or duplicates/singles (32/64)
  • (11.08.22) Fixed: Print preview didn't support emoji in file names (32/64)

(10.08.22) Release Total Commander 10.51 release candidate 1 (RC1)

  • (10.08.22) Fixed: NOTE: THIS WAS CHANGED BACK IN RC3: Search, use list file in "Search in", e.g. @c:\totalcmd\list.txt containing wildcards like *.dll: "Search in subdirectories" was off by 1, e.g. "1 levels" only searched the base directory (32/64)
  • (09.08.22) Fixed: The uninstaller didn't remove the "Total Commander" link from the "common desktop" (installed for all users) location (32/64)
  • (08.08.22) Fixed: When reading directory sizes from "Everything" became too fast in very large folders, some folders didn't receive the size due to message queue overflow (32/64)
  • (08.08.22) Added: Lister, Compare by content: Support side scrolling by tilting mouse wheel left/right (only supported by some mice). Faster with Ctrl pressed (32/64)
  • (07.08.22) Added: Search, second tab, and Change attributes: In the date/time picker, use the same date and time formats as chosen by the user for the file lists (32/64)
  • (07.08.22) Added: Configuration-Options-Tabstops/Data formats: Immediately show the separator chosen in the field "Date" in the field "Date format" (32/64)
  • (04.08.22) Fixed: OneDrive folder: When overlay icons were disabled, OneDrive overlay icons were only shown for EXE/LNK files, although there is a separate option IconOverlaysOneDrive (32/64)
  • (04.08.22) Added: OneDrive folder: Show green circle overlay icon with checkmark for files which are marked for always being available offline ("pinned") (32/64)
  • (04.08.22) Fixed: The default position and size of Lister was outside the current screen when showing the taskbar at the left or top of the screen (32/64)
  • (03.08.22) Added: Multi-rename tool: Added the new placeholder [X] to the dropdown menu of the "+" and "#" buttons, shows actual clipboard content as description. Only shown when the clipboard contains text (32/64)
  • (03.08.22) Fixed: The delete temporary file dialog, shown when editing multiple files from an archive in the same multiple document editor like PFE, didn't support dark mode, and wasn't adjusted to larger font sizes (32/64)
  • (03.08.22) Fixed: Dark mode: Clicking OK in "Change attributes" dialog with invalid input in date or time field showed error that the dialog box couldn't be closed (32/64)
  • (03.08.22) Fixed: Password prompt was cut when entering a RAR archive with a very long path containing encrypted file names, because the displayed name wasn't shortened (32/64)
  • (03.08.22) Fixed: 7zip: Opening multi-part 7zip archive would leave the first file 7z.001 opened (64)
  • (01.08.22) Added: Verify checksums: Support blake3 hashes of arbitrary length between 8 and 2048 bit (2 to 512 characters in hexadecimal format, equal number of characters) (32/64)
  • (01.08.22) Added: Verify checksums: Support extension .bk3 (in addition to .blake3) for Blake 3 hash files (32/64)
  • (01.08.22) Fixed: Increased maximum displayable year from 2559 to 9999 (32/64)
  • (18.07.22) Fixed: When trying to copy a file with F5-F2 and a folder with the same name already existed, the user was asked twice whether he wanted to copy the file to that folder instead (32/64)
  • (18.07.22) Added: Synchronize dirs: Show yellow progress color in task bar when done and the comparison took longer than 10 seconds (32/64)
  • (15.07.22) Added: Multi-rename tool: New placeholder [X] inserts text from the clipboard. The value is cached until the name field is changed, or the +/# button is pressed. Replaces forbidden characters *?:|"<> with underscores (32/64)
  • (15.07.22) Added: Button bar, start menu: New parameter %Q turns off automatic quotation marks around certain parameter combinations when the name contains a space, e.g. %Q%P%N. The user will have to add his own quotation marks (32/64)
  • (15.07.22) Fixed: WindowsCodecs.dll was loaded indirectly from the program directory by the Lazarus libraries by mistake, which is a possible security risk (64)
  • (13.07.22) Fixed: FTP: Re-request master password if the password (stored with master password) was cleared by minimizing and the connection was lost (32/64)
  • (13.07.22) Fixed: FTP: Do not clear password of active connection when minimizing if the password was stored without master password (32/64)
  • (13.07.22) Fixed: Lister: Drive letter in title bar was sometimes shown in uppercase even with DrivesShowUpcase=0 set, e.g. when starting Lister via /S=L C:\path\file.ext. Now defaults to lowercase (32/64)
  • (13.07.22) Fixed: Lister could not zoom icon files (.ico) (32)
  • (13.07.22) Fixed: Removed extra spaces from totalcmd.inc from sections "Sorting" and "Custom Column Views", and made some other small changes (32/64)
  • (13.07.22) Fixed: Unicode characters outside of the basic multilingual plane (low/high surrogates) could not be entered. e.g. emoji via Win+"." (64)
  • (13.07.22) Fixed: Quick search with search dialog: Prevent the accidental creation of more than one quick search window (32/64)
  • (12.07.22) Fixed: Faster reading of directory sizes from "Everything" in very large folders (32/64)
  • (12.07.22) Fixed: Tags from FLAC files were not read when stored in the last metadata block (32/64)