Hi!
Um von der Firma aus per FTP einen Rechner im Internet zu erreichen, muß ich über einen Proxy gehen. Als Beschreibung sagt man uns:
1. From your local machine, FTP to "internet1.delphiauto.net"
2. At the username prompt, enter GDS_user_name@destination_host
3. At the password prompt, enter GDS_user_password
4. After the "authenticated" and "connected" message, at the ftp prompt, enter user destination_user_name
5. At the password prompt, enter destination_password
Example output:
c:\> ftp internet1.delphiauto.net
Connected to internet1.delphiauto.net
220 aftpd:Check Point FireWall-1 Secure FTP server running on internet1.delphiauto.net
User (internet1.delphiauto.net:(none)): vz1234@ftp.earth.com
331 aftpd: FireWall-1 password: you can use FW-1-password
Password:
230-aftpd:User vz1234 authenticated by FireWall-1 authentication
230-aftpd:Connected to ftp.earth.com. Logging in...
230-220 ftp.earth.com NcFTPd Server (licensed copy) ready.
ftp> user anonymous
230-331 Guest login ok, send your complete e-mail address as password
Password:
230-230 You are user #75 of 150 simultaneous users allowed.
230-230
230-230
230-230 Logged in anonymously.
ftp>
Dh. ich baue zuerst eine FTP Verbindung zu internet1.delphiauto.net auf. Dort gebe ich dann meinen Firewall Benutzernamen und Kennwort ein. Bei Benutzername hänge ich noch ein @<ziel rechner> an.
Dann wird eine Verbindung von der Firewall zum Zielrechner aufgebaut und ich muß "USER anonymous" und dann (z.B.) "foo@da.de" senden.
Alternativ gibt's noch folgende Methode:
1. From your local machine, FTP to "internet1.delphiauto.net"
2. At the username prompt, enter GDS_user_name
3. At the password prompt, enter GDS_user_password
4. After the "authenticated" message, at the ftp prompt, enter quote destination_host
5. After the "connected" message, enter user destination_user_name
6. At the password prompt, enter destination_password
Example Output:
c:\> ftp internet1.delphiauto.net
Connected to internet1.delphiauto.net
220 aftp:Check Point FireWall-1 Secure FTP server running on internet1.delphiauto.net
User (internet1.delphiauto.net:(none)): yz1234
331 aftpd: FireWall-1 password: you can use FW-1-password
Password:
230-aftpd:User yz1234 authenticated by FireWall-1 authentication
200 aftpd:Host: you can use 'quote hostname' or Account command ('ACCT')
ftp> quote ftp.earth.net
230-aftpd:Connected to ftp.earth.net. Logging in...
230-220 ftp.earth.com NcFTPd Server (licensed copy) ready.
ftp> user anonymous
230-331 Guest login ok, send your complete e-mail address as password
Password:
230-230 You are user #75 of 150 simultaneous users allowed.
230-230
230-230
230-230 Logged in anonymously.
ftp>
Der Unterscheid ist, das hier als Firewall Username nur der Username verwendet wird und dann ein "quote <zielrechner>" gesendet wird.
Wie trage ich eins von beidem im TC 5.51 ein?
Danke,
Alexander
FTP Proxy Typ?
Moderators: white, Hacker, Stefan2
- ghisler(Author)
- Site Admin
- Posts: 48196
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Lieder geht das nicht mit den Firewall-Einstellungsmöglichkeiten des TC. Schade, dass sich die Firewall-Entwickler immer neue Login-Möglichkeiten ausdenken, anstatt bestehende Standards wie SOCKS4 oder SOCKS5 zu verwenden.
Vielleicht können Sie es ja mit der Option "Sende Befehle" lösen. Versuchen Sie mal folgendes:
Host: internet1.delphiauto.net
User: GDS_user_name@destination_host
Password: GDS_user_password
Commands: user destination_user_name;password
Voraussetzung ist, dass destination_user_name sowie das Passwort keinen Strichpunkt enthält.
Vielleicht können Sie es ja mit der Option "Sende Befehle" lösen. Versuchen Sie mal folgendes:
Host: internet1.delphiauto.net
User: GDS_user_name@destination_host
Password: GDS_user_password
Commands: user destination_user_name;password
Voraussetzung ist, dass destination_user_name sowie das Passwort keinen Strichpunkt enthält.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com
- ghisler(Author)
- Site Admin
- Posts: 48196
- Joined: 2003-02-04, 09:46 UTC
- Location: Switzerland
- Contact:
Da haben sich unsere Meldungen überschnitten! Offenbar unterstützt Ihr Server noch eine dritte Variante des Logins (eben mit SITE) - Glück gehabt.Ha! Hab's!
Wenn ich "Sende Kommando SITE (mit Logon)" einstelle, dann klappt's.
Author of Total Commander
https://www.ghisler.com
https://www.ghisler.com