ftp2ftp bricht bei großen Dateien nach 20s ab. Mit 8.01 OK

nervebehale · Post by *nervebehale » 2014-11-10, 15:20 UTC

Hallo zusammen,

mir stellt sich folgendes Problem:

Version 8.51 32 Bit und/oder 64 bit Version auf einem 64 Bit Rechner

Bei einer Verbindung von ftp zu ftp, bricht der gewünschte kopiervorgang von großen Dateiennach 20s ab. Folgend ein Log dazu:

Code: Select all

Connect to: (10.11.2014 15:31:55)

hostname=xxx.xxx.xxx.xxx

username=XXX

startdir=
xxx.xxx.xxx.xxx.com=xxx.xxx.xxx.xxx.com

220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

220-You are user number 1 of 50 allowed.

220-Local time is now 15:31. Server port: 21.

220-This is a private system - No anonymous login

220-IPv6 connections are also welcome on this server.

220 You will be disconnected after 15 minutes of inactivity.

USER XXXX

331 User XXX OK. Password required

QUIT

----------

Connect to: (10.11.2014 15:32:05)

hostname=XXXXXXXX

username=rs

startdir=

XXXXXXXXX=xxx.xxx.xxx.xxx

220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

220-You are user number 1 of 100 allowed.

220-Local time is now 15:32. Server port: 21.

220-This is a private system - No anonymous login

220-IPv6 connections are also welcome on this server.

220 You will be disconnected after 15 minutes of inactivity.

USER rs

331 User rs OK. Password required

PASS ***********

230-This server supports FXP transfers

230 OK. Current restricted directory is /

SYST

215 UNIX Type: L8

FEAT

211-Extensions supported:

EPRT

IDLE

MDTM

SIZE

MFMT

REST STREAM

MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;

MLSD

AUTH TLS

PBSZ

PROT

UTF8

TVFS

ESTA

PASV

EPSV

SPSV

ESTP

211 End.

OPTS UTF8 ON

200 OK, UTF-8 enabled

Connect ok!

PWD

257 "/" is your current location

Verzeichnis einlesen

TYPE A

200 TYPE is now ASCII

PORT 10,99,249,140,218,3

200 PORT command successful

MLSD

150 Connecting to port 55811

Herunterladen

Warte auf Antwort des Servers...

226-Options: -a -l

226 8 matches total

1:----------

1:Connect to: (10.11.2014 15:32:51)

1:hostname=XXXXXXXXXXXXXXXXXXXX

1:username=XXXXXXXXXX

1:startdir=

1:werbecache.netrtl.com=xxx.xxx.xxx.xxx

1:220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

1:220-You are user number 1 of 50 allowed.

1:220-Local time is now 15:32. Server port: 21.

1:220-This is a private system - No anonymous login

1:220-This server supports FXP transfers

1:220-IPv6 connections are also welcome on this server.

1:220 You will be disconnected after 15 minutes of inactivity.

1:USER XXXXXXXXXXX

1:331 User XXXXXXXXXXX OK. Password required

1:PASS ***********

1:230-User XXXXXXXXXXX has group access to:  XXXXXXXXXXXX   

1:230 OK. Current restricted directory is /

1:SYST

1:215 UNIX Type: L8

1:FEAT

1:211-Extensions supported:

1: EPRT

1: IDLE

1: MDTM

1: SIZE

1: REST STREAM

1: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;

1: MLSD

1: AUTH TLS

1: PBSZ

1: PROT

1: UTF8

1: TVFS

1: ESTA

1: PASV

1: EPSV

1: SPSV

1: ESTP

1:211 End.

1:HELP SITE

1:214-The following SITE commands are recognized

1: ALIAS

1: CHMOD

1: IDLE

1: UTIME

1:214 Pure-FTPd - http://pureftpd.org/

1:OPTS UTF8 ON

1:200 OK, UTF-8 enabled

1:Connect ok!

1:PWD

1:257 "/" is your current location

1:Verzeichnis einlesen

1:TYPE A

1:200 TYPE is now ASCII

1:PASV

1:227 Entering Passive Mode (10,98,108,222,175,105)

1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

1:MLSD

1:150 Accepted data connection

1:Herunterladen

1:Herunterladen: 2.048 Bytes

1:Warte auf Antwort des Servers...

1:226-Options: -a -l

1:226 87676 matches total   <--------------------- KLEINE DATEI HAT FUNKTIONIERT

NOOP

200 Zzz...

DELE WA00684321L00F0U.mxf

250 Deleted WA00684321L00F0U.mxf

Deleted (10.11.2014 15:33:11): ftp://XXXXXXXXX
//WA00684321L00F0U.mxf

Verzeichnis einlesen

PORT 10,99,249,140,218,6

200 PORT command successful

MLSD

150 Connecting to port 55814

Herunterladen

Warte auf Antwort des Servers...

226-Options: -a -l

226 7 matches total

1:PASV

1:227 Entering Passive Mode (10,98,108,222,243,63)

1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

1:LIST *.not

1:150 Accepted data connection

1:Herunterladen

1:Warte auf Antwort des Servers...

1:226-Options: -l

1:226 0 matches total

CWD WA00640487L00F0L.mxf

550 Can't change directory to WA00640487L00F0L.mxf: No such file or directory

PWD

257 "/" is your current location

Verzeichnis einlesen

PORT 10,99,249,140,218,8

200 PORT command successful

MLSD

150 Connecting to port 55816

Herunterladen

Warte auf Antwort des Servers...

226-Options: -a -l

226 7 matches total

TYPE I

200 TYPE is now 8-bit binary

1:TYPE I

1:200 TYPE is now 8-bit binary

PASV

227 Entering Passive Mode (10,98,108,252,38,240)

1:PORT 10,98,108,252,38,240

1:200-FXP transfer: from 10.99.249.140 to 10.98.108.252

1:200 PORT command successful

1:RETR WA00640487L00F0L.mxf

1:150-Connecting to port 9968

1:150 153885.3 kbytes to download

STOR WA00640487L00F0L.mxf

150 Accepted data connection

226-File successfully transferred

226 1.516 seconds (measured here), 99.11 Mbytes per second

1:226-File successfully transferred

1:226 1.497 seconds (measured here), 100.39 Mbytes per second

Copied (10.11.2014 15:33:33): WA00640487L00F0L.mxf -> WA00640487L00F0L.mxf 157.578.596 Bytes, 101.708 kbytes/s

Verzeichnis einlesen

TYPE A

200 TYPE is now ASCII

PORT 10,99,249,140,218,9

200 PORT command successful

MLSD

150 Connecting to port 55817

Herunterladen

Warte auf Antwort des Servers...

226-Options: -a -l

226 8 matches total

DELE WA00640487L00F0L.mxf

250 Deleted WA00640487L00F0L.mxf

Deleted (10.11.2014 15:33:43): ftp://XXXXXXXXX
//WA00640487L00F0L.mxf

Verzeichnis einlesen

PORT 10,99,249,140,218,10

200 PORT command successful

MLSD

150 Connecting to port 55818

Herunterladen

Warte auf Antwort des Servers...

226-Options: -a -l

226 7 matches total

CWD WA00684321L00F0U.mxf

550 Can't change directory to WA00684321L00F0U.mxf: No such file or directory

PWD

257 "/" is your current location

Verzeichnis einlesen

PORT 10,99,249,140,218,11

200 PORT command successful

MLSD

150 Connecting to port 55819

Herunterladen

Warte auf Antwort des Servers...

226-Options: -a -l

226 7 matches total

TYPE I

200 TYPE is now 8-bit binary

PASV

227 Entering Passive Mode (10,98,108,252,173,34)

1:PORT 10,98,108,252,173,34

1:200 PORT command successful

1:RETR WA00684321L00F0U.mxf

1:150-Connecting to port 44322

1:150 13747514.0 kbytes to download

STOR WA00684321L00F0U.mxf

150 Accepted data connection

OFFLINE4, no reply

1:150 20.296 seconds (measured here), 112.02 Mbytes per second

1:TYPE A

1:200 TYPE is now ASCII

1:PASV

1:227 Entering Passive Mode (10,98,108,222,134,174)

1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

1:LIST *.not

1:150 Accepted data connection

1:Herunterladen

1:Warte auf Antwort des Servers...

1:226-Options: -l

1:226 0 matches total

1:PASV

1:227 Entering Passive Mode (10,98,108,222,236,145)

1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

1:LIST *.not

1:150 Accepted data connection

1:Herunterladen

1:Warte auf Antwort des Servers...

1:226-Options: -l

1:226 0 matches total

1:PASV

1:227 Entering Passive Mode (10,98,108,222,148,155)

1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

1:LIST *.not

1:150 Accepted data connection

1:Herunterladen

1:Warte auf Antwort des Servers...

1:226-Options: -l

1:226 0 matches total

1:PASV

1:227 Entering Passive Mode (10,98,108,222,29,18)

1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

1:LIST *.not

1:150 Accepted data connection

1:Herunterladen

1:Warte auf Antwort des Servers...

1:226-Options: -l

1:226 0 matches total

Das seltsame ist, das es mit der Version 8.0 funktioniert

Weiß jemand Rat ???

Post by *ghisler(Author) » 2014-11-13, 10:22 UTC

1:227 Entering Passive Mode (10,98,108,222,29,18 )
1:Server reports local IP -> Redirect to: xxx.xxx.xxx.xxx

Hmm, zu was für einer Art IP-Adresse wird da umgeleitet? Ist das eine andere mit 10. am Anfang, oder eine öffentliche? Das sollte hier eigentlich nicht passieren, weil auf den Server offenbar intern zugegriffen wird?

Sie können das mal testweise abschalten:
wcx_ftp.ini
[General]
SpecialFlags=1024

nervebehale · Post by *nervebehale » 2014-12-16, 11:34 UTC

Hola,

erstmal bitte ich vielmals um Nachsicht, spontan ein knapper Monat im Ausland und ich konnte nicht Antworten. Erst einmal Danke ich werde das umgehend ausprobieren!

nervebehale · Post by *nervebehale » 2014-12-17, 10:47 UTC

So da wäre ich nochmal mit anderen Logfiles zum gleichen Problem, dort gibt es kein Redirect, ich kann leider a.G. der vielen Server im Moment nicht mehr nachvollziehen welche beiden das waren:

Verbindung Server 0:

Code: Select all

[Connect to: (17.12.2014 10:02:51)
hostname=######
username=######
startdir=
saw-inbox=XX.XX.XXX.XXX
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 2 of 50 allowed.
220-Local time is now 10:02. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 15 minutes of inactivity.
USER ######
331 User ###### OK. Password required
PASS ***********
230-This server supports FXP transfers
230 OK. Current restricted directory is /
SYST
215 UNIX Type: L8
FEAT
211-Extensions supported:
 EPRT
 IDLE
 MDTM
 SIZE
 MFMT
 REST STREAM
 MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
 MLSD
 AUTH TLS
 PBSZ
 PROT
 UTF8
 TVFS
 ESTA
 PASV
 EPSV
 SPSV
 ESTP
211 End.
OPTS UTF8 ON
200 OK, UTF-8 enabled
Connect ok!
PWD
257 "/" is your current location
Verzeichnis einlesen
TYPE A
200 TYPE is now ASCII
PORT 10,99,249,161,198,241
200 PORT command successful
MLSD
150 Connecting to port 50929
Herunterladen
Warte auf Antwort des Servers...
226-Options: -a -l 
226 20 matches total
CWD temp
250 OK. Current directory is /temp
PWD
257 "/temp" is your current location
Verzeichnis einlesen
PORT 10,99,249,161,198,242
200 PORT command successful
MLSD
150 Connecting to port 50930
Herunterladen
Warte auf Antwort des Servers...
226-Options: -a -l 
226 6 matches total

Verbindung Server 1:

Code: Select all

1:Connect to: (17.12.2014 10:04:11)
1:hostname=######
1:username=######
1:startdir=
1:saw-inbox1=XX.XX.XXX.XXX
1:220-Welcome to Pure-FTPd.
1:220-You are user number 3 of 100 allowed.
1:220-This is a private system - No anonymous login
1:220-This server supports FXP transfers
1:220-IPv6 connections are also welcome on this server.
1:220 You will be disconnected after 15 minutes of inactivity.
1:USER =######
1:331 User =###### OK. Password required
1:PASS ***********
1:230-User =###### has group access to:  users    video    dialout 
1:230 OK. Current restricted directory is /
1:SYST
1:215 UNIX Type: L8
1:FEAT
1:211-Extensions supported:
1: EPRT
1: IDLE
1: MDTM
1: SIZE
1: REST STREAM
1: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
1: MLSD
1: TVFS
1: ESTP
1: PASV
1: EPSV
1: SPSV
1: ESTA
1: AUTH TLS
1: PBSZ
1: PROT
1:211 End.
1:HELP SITE
1:214-The following SITE commands are recognized
1: ALIAS
1: CHMOD
1: IDLE
1:214 Pure-FTPd - http://pureftpd.org/
1:OPTS UTF8 ON
1:500 Unknown command
1:Connect ok!
1:PWD
1:257 "/" is your current location
1:Verzeichnis einlesen
1:TYPE A
1:200 TYPE is now ASCII
1:PORT 10,99,249,161,198,251
1:200 PORT command successful
1:MLSD
1:150 Connecting to port 50939
1:Herunterladen
1:Warte auf Antwort des Servers...
1:226-Options: -l 
1:226 29 matches total
1:CWD _TEST
1:250 OK. Current directory is /_TEST
1:PWD
1:257 "/_TEST" is your current location
1:Verzeichnis einlesen
1:PORT 10,99,249,161,198,254
1:200 PORT command successful
1:MLSD
1:150 Connecting to port 50942
1:Herunterladen
1:Warte auf Antwort des Servers...
1:226-Options: -l 
1:226 1 matches total

Verschieben einer kleinen Datei (OK):

Code: Select all

1:CWD XABPDWM1.jpg
1:550 Can't change directory to XABPDWM1.jpg: No such file or directory
1:PWD
1:257 "/_TEST" is your current location
1:TYPE I
1:200 TYPE is now 8-bit binary
TYPE I
200 TYPE is now 8-bit binary
1:PASV
1:227 Entering Passive Mode (10,98,108,121,135,216)
PORT 10,98,108,121,135,216
200-FXP transfer: from 10.99.249.161 to 10.98.108.121
200 PORT command successful
RETR XABPDWM1.jpg
150-Connecting to port 34776
150 37.2 kbytes to download
1:STOR XABPDWM1.jpg
1:150 Accepted data connection
1:226-File successfully transferred
1:226 0.000 seconds (measured here), 200.55 Mbytes per second
226-File successfully transferred
226 0.002 seconds (measured here), 19.35 Mbytes per second
1:Copied (17.12.2014 10:06:00): XABPDWM1.jpg -> XABPDWM1.jpg 38.055 Bytes, 182 kbytes/s
1:Verzeichnis einlesen
1:TYPE A
1:200 TYPE is now ASCII
1:PORT 10,99,249,161,199,13
1:200 PORT command successful
1:MLSD
1:150 Connecting to port 50957
1:Herunterladen
1:Warte auf Antwort des Servers...
1:226-Options: -l 
1:226 2 matches total

Verschieben einer großen Datei (schlägt fehl):

Code: Select all

CDUP
250 OK. Current directory is /
PWD
257 "/" is your current location
CWD clips
250 OK. Current directory is /clips
PWD
257 "/clips" is your current location
Verzeichnis einlesen
TYPE A
200 TYPE is now ASCII
PORT 10,99,249,161,199,22
200-FXP transfer: from XX.XX.XXX.XXX to XX.XX.XXX.XXX
200 PORT command successful
MLSD
150 Connecting to port 50966
Herunterladen: 2.048 Bytes
Warte auf Antwort des Servers...
226-Options: -a -l 
226 5718 matches total
1:CWD 2311AUTO.mxf
1:550 Can't change directory to 2311AUTO.mxf: No such file or directory
1:PWD
1:257 "/_TEST" is your current location
1:TYPE I
1:200 TYPE is now 8-bit binary
TYPE I
200 TYPE is now 8-bit binary
1:PASV
1:227 Entering Passive Mode (10,98,108,121,220,59)
PORT 10,98,108,121,220,59
200-FXP transfer: from 10.99.249.161 to 10.98.108.121
200 PORT command successful
RETR 2311AUTO.mxf
150-Connecting to port 56379
150 26401974.3 kbytes to download
1:STOR 2311AUTO.mxf
1:150 Accepted data connection
1:OFFLINE4, no reply
150 20.294 seconds (measured here), 111.38 Mbytes per second
1:----------
1:Connect to: (17.12.2014 10:09:22)
1:hostname=#####
1:username=#####
1:startdir=/_TEST
1:saw-inbox1=10.98.108.121
1:220-Welcome to Pure-FTPd.
1:220-You are user number 3 of 100 allowed.
1:220-This is a private system - No anonymous login
1:220-This server supports FXP transfers
1:220-IPv6 connections are also welcome on this server.
1:220 You will be disconnected after 15 minutes of inactivity.
1:USER #####
1:331 User ##### OK. Password required
1:PASS ***********
1:230-User ##### has group access to:  users    video    dialout 
1:230 OK. Current restricted directory is /
1:SYST
1:215 UNIX Type: L8
1:FEAT
1:211-Extensions supported:
1: EPRT
1: IDLE
1: MDTM
1: SIZE
1: REST STREAM
1: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
1: MLSD
1: TVFS
1: ESTP
1: PASV
1: EPSV
1: SPSV
1: ESTA
1: AUTH TLS
1: PBSZ
1: PROT
1:211 End.
1:HELP SITE
1:214-The following SITE commands are recognized
1: ALIAS
1: CHMOD
1: IDLE
1:214 Pure-FTPd - http://pureftpd.org/
1:Connect ok!
1:CWD /_TEST
1:250 OK. Current directory is /_TEST
1:PWD
1:257 "/_TEST" is your current location
1:Verzeichnis einlesen
1:TYPE A
1:200 TYPE is now ASCII
1:PORT 10,99,249,161,199,26
1:200 PORT command successful
1:MLSD
1:150 Connecting to port 50970
1:Herunterladen
1:Warte auf Antwort des Servers...
1:226-Options: -l 
1:226 3 matches total

Post by *ghisler(Author) » 2014-12-17, 17:50 UTC

Total Commander 8.5 wartet standardmässig 20 Sekunden auf eine Antwort des Servers. Offenbar dauert die Übertragung länger als 20 Sekunden. Das Timeout kann über die wcx_ftp.ini auf max. 300 Sekunden verlängert werden:

wcx_ftp.ini
[General]
DataConnectTimeout=300

Dies wurde eingeführt, um "hängende" Verbindungen zu erkennen. Bei Server zu Server-Transfers kann man leider nicht herausfinden, ob eine Verbindung noch im Gang ist, oder abgebrochen wurde.

nervebehale · Post by *nervebehale » 2014-12-18, 07:33 UTC

Einen ganz herzlichen Dank für die schnelle Hilfe. Erste Tests mit 300s haben schonmal funktioniert!

Post by *ghisler(Author) » 2014-12-18, 10:29 UTC

Danke für die Rückmeldung! Ich werde versuchen, das Timeout für FxP zu entfernen.