TCSumatraPDF Plugin <-> sLister Plugin | SumatraPDF

[Horst.Epp]

...
(At the moment I have switched back to TCSumatraPDF 1.3.).

Same for me.
Version 1.3 is perfect
The key 4 switches to the next Lister plugin.
The keys N and P go to the next or previous file from the lister selection.

[AkulaBig]

If you can do it that way, then everything is more than perfect for me.

No problem. This is just the case when you choose what is best. Only I don't understand. By default when sumatrapdf.ini is empty should I run 3.1? Or from the folder %COMMANDER_PATH%\Plugins\wlx\TCSumatraPDF\SumatraPDF your version?

[tuska]

Allways(!) from here please: %COMMANDER_PATH%\Plugins\wlx\TCSumatraPDF\SumatraPDF\

(Version 3.1 is just separated).

[AkulaBig]

(At the moment I have switched back to TCSumatraPDF 1.3.).

Version 1.3 is perfect

What confuses me is that these keys stop working in SumatraPDF. I will try to make '4' work in both Lister and SumatraPDF. Well, 'N' and 'P', if it doesn't work out, I'll do it like in Lister. In SumatraPDF, they somehow work crookedly. I did not understand the logic of their work. I think this would be the best option.

[AkulaBig]

Allways(!) from here please: %COMMANDER_PATH%\Plugins\wlx\TCSumatraPDF\SumatraPDF\

(Version 3.1 is just separated).

All clear. I will do so.

[tuska]

2AkulaBig

During the tests (see above: Point 11.1) I got the following error message:
"I can't find SumatraPDF.exe, SumatraPDF64.exe it by the path specified in the file sumatrapdf.ini"

I am not a native speaker, but still suggest this text:
"I can't find SumatraPDF.exe, SumatraPDF64.exe in the path specified in the sumatrapdf.ini file"

DeepL Translate
Google Translate

German:
Ich kann SumatraPDF.exe, SumatraPDF64.exe nicht in dem Pfad finden, der in der Datei sumatrapdf.ini angegeben ist.

Thanks!

[AkulaBig]

"I can't find SumatraPDF.exe, SumatraPDF64.exe it by the path specified in the file sumatrapdf.ini"

"I can't find SumatraPDF.exe, SumatraPDF64.exe in the path specified in the sumatrapdf.ini file"

The first phrase in 1.3. And in 1.4 the second phrase. That is already correct. I did a conclusion on a new one in 1.4. And, apparently, he already received the correct translation. I didn't even notice it.

[tuska]

"I can't find SumatraPDF.exe, SumatraPDF64.exe it by the path specified in the file sumatrapdf.ini"

"I can't find SumatraPDF.exe, SumatraPDF64.exe in the path specified in the sumatrapdf.ini file"

The first phrase in 1.3. And in 1.4 the second phrase. That is already correct. I did a conclusion on a new one in 1.4. And, apparently, he already received the correct translation. I didn't even notice it.

Ahh, thanks.

[AkulaBig]

It turned out to fasten '4'. Now in the main window of SumatraPDF, where '4' is not used, it switches plugins, and in bookmarks and other places it works as a SumatraPDF hotkey. Further it is necessary to look 'N' and 'P'.
Oops, gotta check keys 1-8.
https://drive.google.com/file/d/1rHtoxuyDrHXGJSMOZyz4Stc_8kYKf9cS/view?usp=sharing

[Horst.Epp]

Version 1.5b is a no-go.
Important keys are not working.
Key 4 does not switch to next plugin.
Keys N and P don't show the next or previous files from the current selection.
So, still using version 1.3 without any problems.

[AkulaBig]

Version 1.5b is a no-go.
Important keys are not working.
Key 4 does not switch to next plugin.
Keys N and P don't show the next or previous files from the current selection.

'4' should switch to the next plugin in the main window and work like SumatraPDF in tabs.
'N' and 'P' have not been screwed yet.
Now they should work. If in one file they work like in SumatraPDF, when viewing several selected files, they should flip through the files.
That is, the keys '4', 'N' and 'P' are now dual-purpose.
Depending on the situation, they work either in TC or in SumatraPDF.
https://drive.google.com/file/d/1-WAMORKoJWShBR3xAPtEO_jk5FffXpuD/view?usp=sharing

[Horst.Epp]

Version wlx_TCSumatraPDF_1.5b1.7z doesn't change anything.
The keys 4, N and P are still not working.

Back to version 1.3, with all keys working

Btw. I always use my original SumatraPDF-settings and the newest x64 SumatraPDF.

[AkulaBig]

Btw. I always use my original SumatraPDF-settings and the newest x64 SumatraPDF.

Didn't check SumatraPDF x64. Turns out it doesn't work for me either. I'll figure out what's wrong. Please check with SumatraPDF x32. Everything works for me with the latest version. I would like to know what works for you too.

[Horst.Epp]

Yes, with the x86 version of SumatarPDF the latest plugin works, with all keys.

I have the x64 SumatraPDF installed in the OS and don't want an additional x32.
Your plugin version 1.3 has no problems with it,
so there must be a change since that, which makes it not compatible.

[tuska]

2AkulaBig

Thank you that the files (.ini, .exe) are NOT overwritten anymore in version 1.5b1!
Thanks also for adapting the error message for 32-bit and 64-bit and folder "SumatraPDF_3.1mod"!

Here are my test results.

wlx_TCSumatraPDF_1.5b1.7z x64

F3: Lister (sumatrapdf) -> OK
Ctrl+Q, Tab, 4: -> OK!

F3: Lister (sumatrapdf), Digit 4 -> NOK
If you switch to another plugin after F3: Lister (sumatrapdf) via the "Plugin" menu,
then you can press the number 4 as often as you like and the "loop" works.

Mark 5 PDF files, F3: Lister (sumatrapdf), 'N': NOK!

---

wlx_TCSumatraPDF_1.5b1.7z x86

F3: Lister (sumatrapdf) -> OK
Ctrl+Q, Tab, 4: -> OK!

F3: Lister (sumatrapdf), Digit 4 -> NOK
Mark 5 PDF files, F3: Lister (sumatrapdf), 'N': NOK!

---

PS:
But now I'm checking whether sLister supports the 'N' and 'P' keys at all.

EDIT:
sLister x86: 'N', 'P' can only scroll within a PDF file -> NOK!
sLister x64: 'N', 'P' switches between PDF files -> OK!